We are running VM 6.3 and I am attempting to install SLES12 SP1 from the VM reader using NFS like I have done with all other versions.
I have copied the needed files into the RDR and execute the SLES12 EXEC I start the installation, enter the required info when it goes to setup the network connection: (Layer2) (Port 0) qeth.5cb8a3: 0.0.0600: The qeth device is not configured for the OSI layer requi red by z/VM qeth.5cb8a3: 0.0.0600: The qeth device is not configured for the OSI layer requi red by z/VM qeth.3acf0c: 0.0.0600: The qeth device driver failed to recover an error on the device qeth: irb 00000000: 00 c2 60 17 3f 0c c0 38 0e 00 10 00 00 80 00 00 ..`.?..8... ..... qeth: irb 00000010: 01 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........... ..... qeth: sense data 00000000: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .... ............ qeth: sense data 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .... ............ qeth.3acf0c: 0.0.0600: The qeth device driver failed to recover an error on the device Could not set device 0.0.0600 online *** network configuration script failed (error code 2560) *** No network device found. Any ideas? Gene Walters System Programmer WV Office of Technology Data Center 1900 Kanawha Blvd East Bldg 6, Room B-110 Charleston, WV 25305 (304)957-8284 (304)558-1441 fax Work Hours: 6AM-2PM EST ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
