sles 11sp3 Working with FCP devices for the first time. I have 2 devices that I am using to multipath. I've followed the manual pretty well to multipath these devices.
multipath -ll 36005076307ffd4da0000000000000028 dm-1 IBM,2107900 size=100G features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=1 status=active |- 0:0:0:1076379648 sda 8:0 active ready running `- 1:0:0:1076379648 sdb 8:16 active ready running So now I have this device with the really long name - /dev/mapper/36005076307ffd4da0000000000000028 /dev/mapper/36005076307ffd4da0000000000000028_part1 In the manual it talks about using udev to map it to a more friendly name, there it goes wrong. The manual talks about udevinfo, which doesn't exist, it's part of udevadm, but that output doesn't look like the manual. I'm looking for example of udevadm to add a rule to rename those to something short and easy to remember. -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
