>>> On 5/2/2017 at 06:44 AM, Stefan Haberland <[email protected]> wrote:
> Most likely someone from z/VM has to look at this.
Doing a cat on the host_access_count file gets the same/similar error when
running in an LPAR. So, I don't think this is necessarily z/VM related.
[1715374.556774] dasd-eckd.b3193d: 0.0.25e8: An error occurred in the DASD
device driver, reason=09
[1715374.556791] dasd(eckd): I/O status report for device 0.0.25e8:
dasd(eckd): in req: 000000007d6a1ed8 CC:00 FC:04 AC:00 SC:17
DS:0E CS:00 RC:0
dasd(eckd): device 0.0.25e8: Failing CCW: 000000007d6a1fe8
dasd(eckd): Sense(hex) 0- 7: 80 00 00 00 e8 ff ff 04
dasd(eckd): Sense(hex) 8-15: 00 ff 00 06 00 00 00 04
dasd(eckd): Sense(hex) 16-23: e5 21 41 c3 00 01 0f 04
dasd(eckd): Sense(hex) 24-31: 00 00 40 e0 00 00 00 00
dasd(eckd): 24 Byte: 0 MSG 4, no MSGb to SYSOP
[1715374.556799] dasd(eckd): Related CP in req: 000000007d6a1ed8
dasd(eckd): CCW 000000007d6a1fe0: 2760000C 7D6A1FF0 DAT:
18000000 00e81c00 00000000
dasd(eckd): CCW 000000007d6a1fe8: 3E20401A 481E0000 DAT:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Mark Post
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
