>>> On 3/14/2018 at 04:23 PM, Victor Echavarry <[email protected]> wrote: > We're trying to upgrade a SLES 11 SP4 system to SLES 12 SP3 using HTTP as the > protocol for the network installation. The system boots fine and we're able > to connect to the VNC display. The installer is able to grab files from the > HTTP server as well but it fails when it comes to recognizing the existing > system. > > In the "Disk Activation" section we see our DASD disks and, after activating > them (without formatting of course), we then proceed to the next section > where we're supposed to select the "System or Partition to Update" but > nothing shows up. > > This is our parameter file (notice we use "upgrade=1" to trigger upgrade):
As Marcy said, this should work. If it's not, you really need to open up a support request with your provider. They should be able to look at the logs under /var/log/YaST2/ to figure out what is/isn't happening. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
