Again, much thanks to Neale for helping me through this.
Apparently, I missed the last of 12 steps needed to add DASD to a zLinux 
system, which was modifying the /etc/dasd.conf. 

Thank you!
Frank Ramaekers | Senior Systems Administrator | CIS Mainframe Services 


-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Neale 
Ferguson
Sent: Monday, February 27, 2023 12:30 AM
To: [email protected]
Subject: Re: ClefOS will not come up

External Message – Think Before You Click

- cp /etc/dasd.conf /etc/dasd.conf.save

- echo "0.0.0124" >>/etc/dasd.conf (and repeat for each address - NOTE the >>) 
OR
- printf "0.0.0124\n0.0.0125\n0.0.0126\n0.0.0127\n" >>/etc/dasd.conf

- cat /etc/dasd.conf (to make sure it looks okay)

If you make a mistake then just copy the saved version back over.



----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send email to 
[email protected] with the message: INFO LINUX-390 or visit 
https://urldefense.com/v3/__http://www2.marist.edu/htbin/wlvindex?LINUX-390__;!!GePVz-XrgrDUrw!tOVfmKUazSEyOn_Kx-SMwwr2xpFSvzGbaFFwD_aMWAY74rhTD8hJcCBffQlciAmf8TlUwwu5KHnMsFf8$
 

----------------------------------------------------------------------
This message contains information which is privileged and confidential and is 
solely for the use of the intended recipient. If you are not the intended 
recipient, be aware that any review, disclosure, copying, distribution, or use 
of the contents of this message is strictly prohibited. If you have received 
this in error, please destroy it immediately and notify us at 
[email protected].


----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to