Hi there !!!
I found this information from the web some time ago:
-------------------cut---------------------------------
MINIX on the HP200LX
by Dr. Richard L. Dubs
(last updated: July 1, 1998)
Summary
I have developed PCMCIA and BIOS INT13 Hard Disk Services for the HP200LX that
allow someone to boot MINIX from a PCMCIA ATA flash disk. MINIX is not stable
yet on the 200LX, allowing you (at most) to login and type one command
before it
crashes. Nevertheless, I believe that by solving the PCMCIA problem, I have
solved one of the hard parts of getting MINIX to run on the HP200LX, and I'm
hoping that the Internet community will now help finish the job. The
PCMCIA and
BIOS services I have developed should be just as useful to boot and run
LINUX-86
(ELKS) on the 200LX.
The software I have developed is provided on my web page
(www.erols.com/rld) for
download.
---------------------------------------------------------
I hope this would be helpful !
Juanjo
At 19:16 28/04/99 -0300, you wrote:
>Well, I've tried to run ELKS on my palmtop and I don't know if I'm having
>success.
>I use Steffen Gabel's bootelks which needs a kernel image and a *clean*
>vector interrupt image.
>The kernel it's ok, I compiled it from last source. The problem is with the
>vector interrupt image, because I don't have how to make it.
>The bootelks uses a way to get this vii, writing a little program on sector
>0 0 1 of a floppy disk. When you boot the system with this floppy disk, it
>gets a clean vii.
>The HP has DOS in ROM and I can't boot her from flash card or other device,
>so i can't have this image.
>I'm trying to make this image through my pentium but i guess that it's not
>working because when I run bootelks, it gives the following messages:
>BELOW!
>Loading interrupts image...
>Success.
>Loading kernel image...
>Success.
>
>then, if it doesn't crash, it reboots the system... Any idea ?
>
> .~.
> /V\ N[e]xt L[e]v[e]l
> // \\ Isaque Galdino
>/( )\ Programador C/C++, PL/SQL
> ^`~'^ Linux, DOS e Win... ops! :)
>
>
>
