See the BP6 manual at the Abit site www.abit-usa.com
<http://www.abit-usa.com> or www.abit.com.tw <http://www.abit.com.tw>
You will probably need a DOS/Win9x bootdisk; go to www.bootdisk.com
<http://www.bootdisk.com>
Hope this helps and good luck!
Rahul
FYI, the QQ BIOS update does fix the Win2k ACPI compatibility problems. It
does not fix the Linux APIC problem, I still get APIC errors on both CPU's
with 2.3.42.
-----Original Message-----
From: James Manning [mailto:[EMAIL PROTECTED]]
Sent: Saturday, February 05, 2000 2:03 PM
To: [EMAIL PROTECTED]
Subject: [LINUX-ABIT] Re: cross your fingers -
installed QQ bios!
[ Saturday, February 5, 2000 ] DeWitt, Michael wrote:
> up 10:37 so far load average 1.99
Great!
Can someone quickly review the procedure for saving current
bios
and flashing to a new one (and restore of old if it breaks?
:)
or point to a doc about it?
Thanks,
James
--
=- To unsubscribe, email [EMAIL PROTECTED] with
the -=
=- body of "unsubscribe linux-abit".
-=
--
=- To unsubscribe, email [EMAIL PROTECTED] with the -=
=- body of "unsubscribe linux-abit". -=
