Hi!
> This series of patches is against the -mm kernel, and will enable
> docking station support. It is an early patch, but still pretty
> functional, so I think it's worthwhile to include at this point.
> For some laptops, it's necessary to use the pci=assign-busses kernel
> parameter, because some _DCK methods will attempt to assign bus numbers
> to the dock bridge (incorrectly).
On thinkpad X32: I selected
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_ACPI_IBM=y
Recompiled, rebooted with machine out of dock. /sys/bus/pci/slots/ is
empty. I then inserted machine into dock, and locked it:
[EMAIL PROTECTED]:/sys/bus/pci/slots# echo dock > /proc/acpi/ibm/dock
[EMAIL PROTECTED]:/sys/bus/pci/slots# ls
[EMAIL PROTECTED]:/sys/bus/pci/slots#
...still empty. What am I doing wrong?
Pavel
--
Thanks, Sharp!
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
