Hi, I've got a Fujitsu-Siemens Amilo A1667G notebook and there are some issues with it. One of the most important ones is the way CPU speed control works.
It all works perfectly with AC power on. Cpufreq control works right with both kernel and usespace utilities. Even the "fan" button works: if I press that, it fixes the frequency to the lowest 800Mhz and releases it after pressing the button again (although it sometimes looses events and the led status reverses in this cases.) However the problem is that when I am on battery, the speed is everytime fixed to the lowest 800 Mhz. Cpufreq just shows there is no higher frequency available and it cannot be set higher: just like when in AC mode I would press the fan button. This is annoying, because the on-demand frequency setting would be especially important when running on battery (although it is also useful on ac power, for reducing temperature.) Seems to be kernel independent, I currently use 2.6.16. Another issue is about putting it to sleep (S3). The system goes properly to sleep but there is no button to wake it up. I can only press the power button for more seconds to poweroff. The syslog says at initial bootup: May 14 07:48:35 brumi kernel: ACPI wakeup devices: May 14 07:48:35 brumi kernel: MC97 LAN MPC1 So maybe there are really no wakeup events. I could not experiment a lot with this, since I have other issues with wakeup (even from S4), due to the proprietary ATI video driver. I apologize for not being very practiced in debugging these things. I don't know what output I should include here. Please write me what information should I attach in addition, and I will send that in a followup mail. Thank you very much in advance, -- Balazs Ree - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
