On Sun, 02 Jul 2006 01:05:55 +0200
Timo Hoenig <[EMAIL PROTECTED]> wrote:
> Hi Ricardo,
>
> On Sat, 2006-07-01 at 23:46 +0100, R Cerqueira wrote:
>
> > Since we're talking about applying patches, it would be nice if the W5F
> > patch I sent to the list back on April 26th could go in as well.
>
> Patches sent to the acpi4asus list should be reviewed there and
> afterwards sent to linux-acpi. As there was no reply to your mail on
> acpi4asus it got lost.
>
> > Anything wrong with it?
>
> Just had a short look at it and it looks fine to me. You may probably
> want to re-diff against Len's tree as I haven't checked if it still
> applies cleanly.
>
I'm carrying this version, whcih applies and builds OK.
From: Marek W <[EMAIL PROTECTED]>
Add support for W3000 (W3V) and indirectly fixes an issue with kmilo under KDE
(it was triggering excessive LCD read error messages by querying asus_acpi
module) allowing people (I am probably the only one who tested this) with
W3000 to run kmilo.
Cc: Karol Kozimor <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/acpi/asus_acpi.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff -puN drivers/acpi/asus_acpi.c~asus_acpi-w3000-support
drivers/acpi/asus_acpi.c
--- a/drivers/acpi/asus_acpi.c~asus_acpi-w3000-support
+++ a/drivers/acpi/asus_acpi.c
@@ -138,6 +138,7 @@ struct asus_hotk {
S2x, //S200 (J1 reported), Victor MP-XP7210
W1N, //W1000N
W5A, //W5A
+ W3V, //W3030V
xxN, //M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
//(Centrino)
END_MODEL
@@ -376,6 +377,17 @@ static struct model_data model_conf[END_
.display_get = "\\ADVG"},
{
+ .name = "W3V",
+ .mt_mled = "MLED",
+ .mt_wled = "WLED",
+ .mt_lcd_switch = xxN_PREFIX "_Q10",
+ .lcd_status = "\\BKLT",
+ .brightness_set = "SPLV",
+ .brightness_get = "GPLV",
+ .display_set = "SDSP",
+ .display_get = "\\INFB"},
+
+ {
.name = "xxN",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
@@ -1097,6 +1109,8 @@ static int asus_model_match(char *model)
return A4G;
else if (strncmp(model, "W1N", 3) == 0)
return W1N;
+ else if (strncmp(model, "W3V", 3) == 0)
+ return W3V;
else if (strncmp(model, "W5A", 3) == 0)
return W5A;
else
@@ -1200,9 +1214,10 @@ static int asus_hotk_get_info(void)
hotk->methods->mt_wled = NULL;
/* L5D's WLED is not controlled by ACPI */
else if (strncmp(string, "M2N", 3) == 0 ||
+ strncmp(string, "W3V", 3) == 0 ||
strncmp(string, "S1N", 3) == 0)
hotk->methods->mt_wled = "WLED";
- /* M2N and S1N have a usable WLED */
+ /* M2N, S1N and W3V have a usable WLED */
else if (asus_info) {
if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
hotk->methods->mled_status = NULL;
_
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
