Applied to acpi-test.
thanks,
-Len
On Sunday 20 August 2006 12:25, Karol Kozimor wrote:
> Thus wrote Len Brown:
> > Karol,
> > What shall we do with this?
> >
> > If you want it applied, you can simply reply-all to akpm's e-mail and say
> > "please apply".
> > If you want me to put it in the batch for 2.6.19, i can do that too.
>
>
> Hi,
> Sorry for the delay, I've been traveling for 2 weeks and will be for 2
> more. The patch *looks* OK, but I can't verify all the method nodes here.
> Please put it in the test tree, but don't apply to mainline yet, I'll try
> to verify this ASAP.
>
> --
> Karol 'sziwan' Kozimor
> [EMAIL PROTECTED]
>
> --------------
> From: Marek W <[EMAIL PROTECTED]>
>
> Add support for W3000 (W3V) and indirectly fixes an issue with kmilo under KDE
> (it was triggering excessive LCD read error messages by querying asus_acpi
> module) allowing people (I am probably the only one who tested this) with
> W3000 to run kmilo.
>
> Cc: Karol Kozimor <[EMAIL PROTECTED]>
> Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
> ---
>
> drivers/acpi/asus_acpi.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff -puN drivers/acpi/asus_acpi.c~asus_acpi-w3000-support
> drivers/acpi/asus_acpi.c
> --- a/drivers/acpi/asus_acpi.c~asus_acpi-w3000-support
> +++ a/drivers/acpi/asus_acpi.c
> @@ -138,6 +138,7 @@ struct asus_hotk {
> S2x, //S200 (J1 reported), Victor MP-XP7210
> W1N, //W1000N
> W5A, //W5A
> + W3V, //W3030V
> xxN, //M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
> //(Centrino)
> END_MODEL
> @@ -376,6 +377,17 @@ static struct model_data model_conf[END_
> .display_get = "\\ADVG"},
>
> {
> + .name = "W3V",
> + .mt_mled = "MLED",
> + .mt_wled = "WLED",
> + .mt_lcd_switch = xxN_PREFIX "_Q10",
> + .lcd_status = "\\BKLT",
> + .brightness_set = "SPLV",
> + .brightness_get = "GPLV",
> + .display_set = "SDSP",
> + .display_get = "\\INFB"},
> +
> + {
> .name = "xxN",
> .mt_mled = "MLED",
> /* WLED present, but not controlled by ACPI */
> @@ -1097,6 +1109,8 @@ static int asus_model_match(char *model)
> return A4G;
> else if (strncmp(model, "W1N", 3) == 0)
> return W1N;
> + else if (strncmp(model, "W3V", 3) == 0)
> + return W3V;
> else if (strncmp(model, "W5A", 3) == 0)
> return W5A;
> else
> @@ -1200,9 +1214,10 @@ static int asus_hotk_get_info(void)
> hotk->methods->mt_wled = NULL;
> /* L5D's WLED is not controlled by ACPI */
> else if (strncmp(string, "M2N", 3) == 0 ||
> + strncmp(string, "W3V", 3) == 0 ||
> strncmp(string, "S1N", 3) == 0)
> hotk->methods->mt_wled = "WLED";
> - /* M2N and S1N have a usable WLED */
> + /* M2N, S1N and W3V have a usable WLED */
> else if (asus_info) {
> if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
> hotk->methods->mled_status = NULL;
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html