From: Stefan Schmidt <[EMAIL PROTECTED]>
Document the change of the experimental flag for brightness and volume.
Signed-off-by: Stefan Schmidt <[EMAIL PROTECTED]>
Acked-by: Borislav Deianov <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
---
Documentation/ibm-acpi.txt | 22 ++++++----------------
1 files changed, 6 insertions(+), 16 deletions(-)
diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt
index 71aa403..1672590 100644
--- a/Documentation/ibm-acpi.txt
+++ b/Documentation/ibm-acpi.txt
@@ -30,8 +30,8 @@ detailed description):
- ACPI sounds
- temperature sensors
- Experimental: embedded controller register dump
- - Experimental: LCD brightness control
- - Experimental: volume control
+ - LCD brightness control
+ - Volume control
- Experimental: fan speed, fan enable/disable
A compatibility table by model and feature is maintained on the web
@@ -523,13 +523,8 @@ registers contain the current battery ca
with this, do send me your results (including some complete dumps with
a description of the conditions when they were taken.)
-EXPERIMENTAL: LCD brightness control -- /proc/acpi/ibm/brightness
------------------------------------------------------------------
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
+LCD brightness control -- /proc/acpi/ibm/brightness
+---------------------------------------------------
This feature allows software control of the LCD brightness on ThinkPad
models which don't have a hardware brightness slider. The available
@@ -542,13 +537,8 @@ commands are:
The <level> number range is 0 to 7, although not all of them may be
distinct. The current brightness level is shown in the file.
-EXPERIMENTAL: Volume control -- /proc/acpi/ibm/volume
------------------------------------------------------
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
+Volume control -- /proc/acpi/ibm/volume
+---------------------------------------
This feature allows volume control on ThinkPad models which don't have
a hardware volume knob. The available commands are:
--
1.4.3.rc2.g23bed-dirty
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
