Please open bug at bugzilla.kernel.org and attach acpidump output. Thanks, Alex.
John Floyd пишет: > Hi, > > Have a specialised weatherproof laptop with a smartbattery running FC6 > latest kernel. I cannot get battey monitoring going. Have loaded > modules i2c_ec and sbs with out any errors. > > log/messages indicate that the EC driver loads with > ACPI: EC HC smbus [SMB1] > > There is nothing from the sbs module though it is loaded and > the /proc/acpi/battery directory is empty. > > The smartbattery can be recognized. If I run the following command ... > > smartbattery 1 (1 is to specify the i2c dev, > needs i2c-dev module loaded) > > then I get battery status, which behaves properly (changes if I unplug > AC etc). It shows Battery name, status , charge or discharge current, > time to full/left, temperature etc. The smartbattery command came > with the initial code exploring the ec-smbus interface a couple of > years ago by Bruno Ducrot. > > However nothing shows up in the proc/acpi/battery directory under the > sbs module, and therefore the gui battery indicators do not work > > Any suggestions? > > > Love to get this working in the gui. > > > John > -- > John Floyd > Senior Natural Resource Officer > Department of Environment and Climate Change > Phone +61-2-9895-5956 > Fax +61-2-9895-7263 > [EMAIL PROTECTED] > > ------------------------------------------------------- > - > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
