From: Tear <[EMAIL PROTECTED]>
I have a Dell Optiplex GX240 and when I boot Linux, ACPI gets set up by only
acpi=ht. dmesg shows the following line:
DELL GX240 detected: force use of acpi=ht
Everything seemed to be fine. However, I discovered that everything is not
fine. The USB controller works so slowly that copying a few (uncached) 1
megabyte large photos from a USB-enabled digital camera takes many minutes
instead of a couple of seconds.
I am using Linux 2.6.21.1 on a Debian 4.0 ("Etch") system.
I thought that this might be related to ACPI. So I tried to boot with _only_
"acpi=force" appended to the kernel command line. Voila, the USB controller
started to work at full speed and copying photos from my digital camera took
only seconds.
I tested the system with "acpi=force" and could not find anything which did
not work.
I thought that this might be related to interrupts and APIC as well. (Note
that this is APIC, not ACPI.) I tried booting with _only_ "noapic" and
"nolapic" appended to the command line. Again, the USB controller started to
work at full speed.
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
---
arch/i386/kernel/acpi/boot.c | 8 --------
1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 280898b..a2c8b9e 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -971,14 +971,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
},
{
.callback = force_acpi_ht,
- .ident = "DELL GX240",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"),
- DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"),
- },
- },
- {
- .callback = force_acpi_ht,
.ident = "HP VISUALIZE NT Workstation",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
--
1.5.3.rc2.22.g69a9b
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
