I'm nervous about deleting ec_intr=
because if auto mode selection fails,
we have no easy workaround.

Also, I'd like to be able to see in dmesg something like:

ACPI: EC: initialized in polling mode

this tells us they're running the new EC driver that starts life in polling mode

ACPI: EC: interrupt mode enabled

this tells us that we successfully switched to interrupt mode.

thanks,
-Len

On Monday 08 October 2007 06:19:18 pm Alexey Starikovskiy wrote:
> Start in POLL mode, and if we receive confirmation GPE,
> switch to INT mode.
> If confirmations are not sent, switch back to POLL.
> 
> Signed-off-by: Alexey Starikovskiy <[EMAIL PROTECTED]>
> ---
> 
>  Documentation/kernel-parameters.txt |    5 ---
>  drivers/acpi/ec.c                   |   51 
> +++++++++++------------------------
>  2 files changed, 16 insertions(+), 40 deletions(-)
> 
> diff --git a/Documentation/kernel-parameters.txt 
> b/Documentation/kernel-parameters.txt
> index 4d175c7..8a4a612 100644
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -569,11 +569,6 @@ and is between 256 and 4096 characters. It is defined in 
> the file
>  
>       eata=           [HW,SCSI]
>  
> -     ec_intr=        [HW,ACPI] ACPI Embedded Controller interrupt mode
> -                     Format: <int>
> -                     0: polling mode
> -                     non-0: interrupt mode (default)
> -
>       eda=            [HW,PS2]
>  
>       edb=            [HW,PS2]
> diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
> index 167ec80..fa3f2aa 100644
> --- a/drivers/acpi/ec.c
> +++ b/drivers/acpi/ec.c
> @@ -71,14 +71,10 @@ enum ec_event {
>  #define ACPI_EC_DELAY                500     /* Wait 500ms max. during EC 
> ops */
>  #define ACPI_EC_UDELAY_GLK   1000    /* Wait 1ms max. to get global lock */
>  
> -static enum ec_mode {
> -     EC_INTR = 1,            /* Output buffer full */
> -     EC_POLL,                /* Input buffer empty */
> -} acpi_ec_mode = EC_INTR;
> -
>  enum {
>       EC_FLAGS_WAIT_GPE = 0,          /* Don't check status until GPE arrives 
> */
>       EC_FLAGS_QUERY_PENDING,         /* Query is pending */
> +     EC_FLAGS_GPE_MODE,              /* Expect GPE to be sent for status 
> change */
>  };
>  
>  static int acpi_ec_remove(struct acpi_device *device, int type);
> @@ -169,21 +165,23 @@ static inline int acpi_ec_check_status(struct acpi_ec 
> *ec, enum ec_event event)
>  
>  static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int 
> force_poll)
>  {
> -     if (unlikely(force_poll) || acpi_ec_mode == EC_POLL) {
> -             unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
> -             clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
> -             while (time_before(jiffies, delay)) {
> -                     if (acpi_ec_check_status(ec, event))
> -                             return 0;
> -             }
> -     } else {
> +     if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) &&
> +         likely(!force_poll)) {
>               if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, 
> event),
>                                      msecs_to_jiffies(ACPI_EC_DELAY)))
>                       return 0;
>               clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
>               if (acpi_ec_check_status(ec, event)) {
> +                     clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
>                       return 0;
>               }
> +     } else {
> +             unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
> +             clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
> +             while (time_before(jiffies, delay)) {
> +                     if (acpi_ec_check_status(ec, event))
> +                             return 0;
> +             }
>       }
>       printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
>                              " status = %d, expect_event = %d\n",
> @@ -481,18 +479,17 @@ static u32 acpi_ec_gpe_handler(void *data)
>       struct acpi_ec *ec = data;
>  
>       clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
> -
> -     if (acpi_ec_mode == EC_INTR) {
> +     if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
>               wake_up(&ec->wait);
> -     }
>  
>       if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_SCI) {
>               if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
>                       status = acpi_os_execute(OSL_EC_BURST_HANDLER,
>                               acpi_ec_gpe_query, ec);
> -     }
> +     } else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags)))
> +             set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
>  
> -     return status == AE_OK ?
> +     return ACPI_SUCCESS(status) ?
>           ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
>  }
>  
> @@ -923,20 +920,4 @@ static void __exit acpi_ec_exit(void)
>  
>       return;
>  }
> -#endif                               /* 0 */
> -
> -static int __init acpi_ec_set_intr_mode(char *str)
> -{
> -     int intr;
> -
> -     if (!get_option(&str, &intr))
> -             return 0;
> -
> -     acpi_ec_mode = (intr) ? EC_INTR : EC_POLL;
> -
> -     printk(KERN_NOTICE PREFIX "%s mode.\n", intr ? "interrupt" : "polling");
> -
> -     return 1;
> -}
> -
> -__setup("ec_intr=", acpi_ec_set_intr_mode);
> +#endif       /* 0 */
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to