On Wed, 2007-10-31 at 14:26 +0100, Rafael J. Wysocki wrote:
> On Wednesday, 31 October 2007 03:27, Len Brown wrote:
> > It would be interseting if any of the folks having power consumption
> > problems when suspended see an improvement with this patch.
> >
> > Are there plans to refresh this patch and get it upstream?
> >
> > Acked-by: Len Brown <[EMAIL PROTECTED]>
>
> There was a discussion regarding this patch, IIRC, and it was argued that
> _PSx are only applicable to IDE/PATA devices.
>
> I wonder if this has been addressed.
Sure, there is a check for PATA. I refreshed the patch to against latest
git tree.
ACPI spec (ver 3.0a, p289) requires IDE power on/off executes ACPI _PSx
methods. As recently most PATA drivers use libata, this patch adds _PSx
method support in libata. ACPI spec doesn't mention if SATA requires the
same _PSx method.
Signed-off-by: Shaohua Li <[EMAIL PROTECTED]>
Acked-by: Len Brown <[EMAIL PROTECTED]>
---
drivers/ata/libata-acpi.c | 33 +++++++++++++++++++++++++++++++++
drivers/ata/libata-eh.c | 3 +++
drivers/ata/libata.h | 2 ++
3 files changed, 38 insertions(+)
Index: linux/drivers/ata/libata-acpi.c
===================================================================
--- linux.orig/drivers/ata/libata-acpi.c 2007-10-26 08:49:07.000000000
+0800
+++ linux/drivers/ata/libata-acpi.c 2007-11-01 09:17:12.000000000 +0800
@@ -652,6 +652,39 @@ void ata_acpi_on_resume(struct ata_port
}
/**
+ * ata_acpi_set_state - set the port power state
+ * @ap: target ATA port
+ * @state: state, on/off
+ *
+ * This function executes the _PS0/_PS3 ACPI method to set the power state.
+ * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
+ */
+void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
+{
+ int max_devices, i;
+
+ if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA))
+ return;
+
+ /* channel first and then drives for power on and verse versa for power
off */
+ if (state.event == PM_EVENT_ON)
+ acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
+
+ max_devices = ata_link_max_devices(&ap->link);
+
+ for (i = 0; i < max_devices; ++i) {
+ struct ata_device *dev = &ap->link.device[i];
+
+ if (dev->acpi_handle)
+ acpi_bus_set_power(dev->acpi_handle,
+ state.event == PM_EVENT_ON ?
+ ACPI_STATE_D0: ACPI_STATE_D3);
+ }
+ if (state.event != PM_EVENT_ON)
+ acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3);
+}
+
+/**
* ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration
* @dev: target ATA device
*
Index: linux/drivers/ata/libata-eh.c
===================================================================
--- linux.orig/drivers/ata/libata-eh.c 2007-10-31 09:14:06.000000000 +0800
+++ linux/drivers/ata/libata-eh.c 2007-11-01 08:55:05.000000000 +0800
@@ -2796,6 +2796,7 @@ static void ata_eh_handle_port_suspend(s
if (ap->ops->port_suspend)
rc = ap->ops->port_suspend(ap, ap->pm_mesg);
+ ata_acpi_set_state(ap, PMSG_SUSPEND);
out:
/* report result */
spin_lock_irqsave(ap->lock, flags);
@@ -2841,6 +2842,8 @@ static void ata_eh_handle_port_resume(st
WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
+ ata_acpi_set_state(ap, PMSG_ON);
+
if (ap->ops->port_resume)
rc = ap->ops->port_resume(ap);
Index: linux/drivers/ata/libata.h
===================================================================
--- linux.orig/drivers/ata/libata.h 2007-10-30 14:17:14.000000000 +0800
+++ linux/drivers/ata/libata.h 2007-11-01 08:55:05.000000000 +0800
@@ -111,12 +111,14 @@ extern void ata_acpi_associate(struct at
extern int ata_acpi_on_suspend(struct ata_port *ap);
extern void ata_acpi_on_resume(struct ata_port *ap);
extern int ata_acpi_on_devcfg(struct ata_device *adev);
+extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
#else
static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { }
static inline void ata_acpi_associate(struct ata_host *host) { }
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
static inline void ata_acpi_on_resume(struct ata_port *ap) { }
static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; }
+static inline void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
{ }
#endif
/* libata-scsi.c */
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
