On Wed, 2007-11-14 at 07:32 -0500, Adam Tauno Williams wrote:
> I have a Toshiba P105-S6207 running openSUSE 10.3
> (2.6.22.12-0.1-default). All the devices (to my knowledge) are working,
> except sound; I've tried various things and the sound driver seems to
> load just fine but produce no output. Then I noticed a message in dmesg
> about trying to boot with "acpi_osi=!Linux". So I booted as:
>
> root=/dev/Aleph/Root vga=0x314 resume=/dev/sda2 splash=silent acpi_osi=!
> Linux
>
> and Bingo! I got sound. Is there a guide somewhere as what to test and
> report further?
--
Adam Tauno Williams, Network & Systems Administrator
Consultant - http://www.whitemiceconsulting.com
Developer - http://www.opengroupware.org
Linux version 2.6.22.12-0.1-default ([EMAIL PROTECTED]) (gcc version 4.2.1
(SUSE Linux)) #1 SMP 2007/11/06 23:05:18 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
BIOS-e820: 000000007f690000 - 000000007f69c000 (ACPI data)
BIOS-e820: 000000007f69c000 - 000000007f700000 (ACPI NVS)
BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1142MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7690
Entering add_active_range(0, 0, 521872) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 521872
early_node_map[1] active PFN ranges
0: 0 -> 521872
On node 0 totalpages: 521872
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2285 pages used for memmap
HighMem zone: 290211 pages, LIFO batch:31
DMI present.
Using APIC driver default
ACPI: RSDP 000F75D0, 0024 (r2 TOSQCI)
ACPI: XSDT 7F691FF6, 0074 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
ACPI: FACP 7F69BC2A, 00F4 (r3 TOSQCI TOSQCI00 6040000 ALAN 1)
ACPI: DSDT 7F69305C, 8B5A (r1 TOSQCI Denver 6040000 MSFT 3000001)
ACPI: FACS 7F69CFC0, 0040
ACPI: APIC 7F69BD1E, 0068 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A)
ACPI: HPET 7F69BD86, 0038 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A)
ACPI: MCFG 7F69BDBE, 003C (r1 TOSQCI TOSQCI00 6040000 LOHR 5A)
ACPI: APIC 7F69BDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 7F69BE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SLIC 7F69BE8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
ACPI: SSDT 7F6925F6, 025F (r1 PmRef Cpu0Tst 3000 INTL 20060912)
ACPI: SSDT 7F692550, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20060912)
ACPI: SSDT 7F69206A, 04E6 (r1 PmRef CpuPm 3000 INTL 20060912)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists. Total pages: 517795
Kernel command line: root=/dev/Aleph/Root vga=0x314 resume=/dev/sda2
splash=silent acpi_osi=!Linux
bootsplash: silent mode.
ACPI: Disabled _OSI(Linux)
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1672.358 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2061328k/2087488k available (1825k kernel code, 24932k reserved, 765k
data, 228k init, 1169984k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc038e000 - 0xc03c7000 ( 228 kB)
.data : 0xc02c842b - 0xc0387964 ( 765 kB)
.text : 0xc0100000 - 0xc02c842b (1825 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3348.12 BogoMIPS (lpj=6696245)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d
00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4348k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 1074 Objects with 82 Devices 253 Methods 27 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 4 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 13 Objects with 0 Devices 4 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3344.37 BogoMIPS (lpj=6688746)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d
00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
Total of 2 processors activated (6692.49 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=56
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 3 Runtime GPEs
in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package
initialization:..................................................................................................
Initialized 25/27 Regions 6/6 Fields 30/31 Buffers 37/51 Packages (1107 nodes)
Initializing Device/Processor/Thermal objects by executing _INI
methods:.<4>ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to [email protected]
.
Executed 2 _INI methods requiring 0 _STA executions (examined 87 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
Time: tsc clocksource has been installed.
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 88000000-880fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 88100000-881fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 11, cardbus bridge: 0000:0a:04.0
IO window: 00001400-000014ff
IO window: 00001c00-00001cff
PREFETCH window: 8c000000-8fffffff
MEM window: 90000000-93ffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: d0100000-d01fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:00:1c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:0a:04.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:0a:04.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1195064624.748:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3750k, total
7872k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78734 bytes
bootsplash: ...found (800x600, 27773 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x82a0b1, caps: 0xb04713/0x60040d
synaptics: Toshiba Satellite P105 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /class/input/input2
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
ACPI: SSDT 7F692D9E, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20060912)
Parsing all Control Methods:
Table [SSDT](id 006B) - 6 Objects with 0 Devices 3 Methods 0 Regions
ACPI: SSDT 7F692855, 04C4 (r1 PmRef Cpu0Cst 3001 INTL 20060912)
Parsing all Control Methods:
Table [SSDT](id 006C) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: SSDT 7F692F94, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20060912)
Parsing all Control Methods:
Table [SSDT](id 0070) - 4 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 7F692D19, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20060912)
Parsing all Control Methods:
Table [SSDT](id 0071) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (38 C)
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
ata1.00: ATA-7: FUJITSU MHV2200BT PL, 00000050, max UDMA/100
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
Clocksource tsc unstable (delta = -340621612 ns)
ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
USB Universal Host Controller Interface driver v3.0
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda:<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
sda1 sda2 sda3 sda4
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.12-0.1-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.12-0.1-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.12-0.1-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.12-0.1-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new device found, idVendor=0d49, idProduct=3100
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Personal Storage 3100
usb 1-1: Manufacturer: Maxtor Corporation
usb 1-1: SerialNumber: 5030400047420
usb 1-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0644000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.22.12-0.1-default ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 1-1: can't set config #1, error -71
md: linear personality registered for level -1
usb 1-1: USB disconnect, address 2
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 5-1: new high speed USB device using ehci_hcd and address 2
usb 5-1: new device found, idVendor=0d49, idProduct=3100
usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: Personal Storage 3100
usb 5-1: Manufacturer: Maxtor Corporation
usb 5-1: SerialNumber: 503040004742
usb 5-1: configuration #1 chosen from 1 choice
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
JBD: barrier-based sync failed on dm-2 - disabling barriers
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: new device found, idVendor=0451, idProduct=2046
usb 1-2: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: new device found, idVendor=0483, idProduct=2016
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Biometric Coprocessor
usb 3-1: Manufacturer: STMicroelectronics
usb 3-1: configuration #1 chosen from 1 choice
usb 1-2.3: new low speed USB device using uhci_hcd and address 4
usb 1-2.3: new device found, idVendor=046d, idProduct=c016
usb 1-2.3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Optical USB Mouse
usb 1-2.3: Manufacturer: Logitech
usb 1-2.3: configuration #1 chosen from 1 choice
usb 1-2.4: new low speed USB device using uhci_hcd and address 5
usb 1-2.4: new device found, idVendor=046d, idProduct=c505
usb 1-2.4: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB Receiver
usb 1-2.4: Manufacturer: Logitech
usb 1-2.4: configuration #1 chosen from 1 choice
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux,
1.1.0
iwl3945: Copyright(c) 2003-2007 Intel Corporation
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
Copyright (c) 1999-2007 Intel Corporation.
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:06 failed with error -16
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
iTCO_vendor_support: vendor-support=0
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Linux agpgart interface v0.102 (c) Dave Jones
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: Battery Slot [BAT1] (battery present)
intel_rng: FWH not detected
PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:16:36:dd:6d:36
iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
wmaster0: Selected rate control algorithm 'iwl-3945-rs'
ACPI: AC Adapter [ACAD] (on-line)
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input6
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2.3
wmaster0 renamed to eth1
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
wlan0 renamed to wlan0_rename
input: Logitech USB Receiver as /class/input/input7
PCI: Enabling device 0000:0a:04.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:0a:04.2[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:0a:04.2 to 64
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2.4
sdhci: SDHCI controller found at 0000:0a:04.3 [104c:803c] (rev 0)
PCI: Enabling device 0000:0a:04.3 (0000 -> 0002)
ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:0a:04.3 to 64
mmc0: SDHCI at 0xd0102800 irq 16 DMA
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
udev: renamed network interface wmaster0 to eth1
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
tifm_core: MMC/SD card detected in socket 0:1
input: Logitech USB Receiver as /class/input/input8
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2.4
usbcore: registered new interface driver usbhid
agpgart: AGP aperture is 256M @ 0xc0000000
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Yenta: CardBus bridge found at 0000:0a:04.0 [1179:ff31]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:0a:04.0, mfunc 0x01a21b22, devctl 0x66
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
PCI: Enabling device 0000:0a:04.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:0a:04.1[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:0a:04.1 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0102000-d01027ff]
Max Packet=[2048] IR/IT contexts=[4/8]
mmcblk0: mmc1:b368 SDC 1960448KiB
mmcblk0:<5>scsi 2:0:0:0: Direct-Access WDC WD25 00JB-00REA0 20.0 PQ:
0 ANSI: 0
p1
sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
JBD: barrier-based sync failed on dm-2 - disabling barriers
Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
AppArmor: AppArmor initialized
audit(1195064684.589:2): type=1505 info="AppArmor initialized" pid=2298
JBD: barrier-based sync failed on dm-1 - disabling barriers
JBD: barrier-based sync failed on dm-2 - disabling barriers
IA-32 Microcode Update Driver: v1.14a <[EMAIL PROTECTED]>
ip6_tables: (C) 2000-2006 Netfilter Core Team
powernow: This module only works with AMD K7 CPUs
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
audit(1195064700.939:3): audit_pid=3123 old=0 by auid=4294967295
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized i915 1.6.0 20060119 on minor 0
NET: Registered protocol family 17
JBD: barrier-based sync failed on dm-3 - disabling barriers
JBD: barrier-based sync failed on dm-0 - disabling barriers
bootsplash: status on console 0 changed to on
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.212 DST=224.0.0.251
LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.212 DST=224.0.0.251
LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.212 DST=224.0.0.251
LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.212 DST=224.0.0.251
LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.212 DST=224.0.0.251
LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.212 DST=224.0.0.251
LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:fb:00:16:ce:37:29:f6:08:00 SRC=192.168.1.96 DST=224.0.0.251
LEN=85 TOS=0x00 PREC=0x00 TTL=255 ID=43277 PROTO=UDP SPT=5353 DPT=5353 LEN=65
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.212 DST=224.0.0.251
LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.212 DST=224.0.0.251
LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.212 DST=224.0.0.251
LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:fb:00:16:ce:37:29:f6:08:00 SRC=192.168.1.96 DST=224.0.0.251
LEN=85 TOS=0x00 PREC=0x00 TTL=255 ID=30633 PROTO=UDP SPT=5353 DPT=5353 LEN=65
# dmidecode 2.9
SMBIOS 2.4 present.
30 structures occupying 1028 bytes.
Table at 0x000DF010.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: TOSHIBA
Version: V4.00
Release Date: 08/07/20072
Address: 0xE8F00
Runtime Size: 94464 bytes
ROM Size: 64 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: TOSHIBA
Product Name: Satellite P105
Version: PSPAAU-01600S
Serial Number: 17128950W
UUID: 80126A9D-5B8F-D811-8ED0-001636DD6D36
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: TOSHIBA
Product Name: Satellite P105
Version: Not Applicable
Serial Number: 1234567890
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: TOSHIBA
Type: Notebook
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x42443120
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: U2E1
Type: Central Processor
Family: Other
Manufacturer: Intel
ID: F6 06 00 00 FF FB EB BF
Version: Intel(R) Core(TM)2 CPU T5
Voltage: 3.3 V
External Clock: 166 MHz
Max Speed: 1666 MHz
Current Speed: 1666 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 KB
Maximum Size: 16 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 2048 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot J11
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x0008, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: HD-Audio
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: PSPAAU-01600S,SQ004239V06,11B
Handle 0x000A, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x000B, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x00000003
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x000C, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 3 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: 1
Locator: M1
Bank Locator: Bank 0
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000E, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: 1
Locator: M2
Bank Locator: Bank 1
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000F, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x000C
Partition Width: 0
Handle 0x0010, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x000D
Memory Array Mapped Address Handle: 0x000F
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0011, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x000E
Memory Array Mapped Address Handle: 0x000F
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0012, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x0013, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown
Handle 0x0014, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59
Handle 0x0015, DMI type 26, 20 bytes
Voltage Probe
Description: Voltage Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0016, DMI type 27, 12 bytes
Cooling Device
Temperature Probe Handle: 0x0017
Type: Fan
Status: OK
OEM-specific Information: 0x00000000
Handle 0x0017, DMI type 28, 20 bytes
Temperature Probe
Description: Temperature Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0018, DMI type 29, 20 bytes
Electrical Current Probe
Description: Electrical Current Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0019, DMI type 30, 6 bytes
Out-of-band Remote Access
Manufacturer Name: Intel
Inbound Connection: Enabled
Outbound Connection: Disabled
Handle 0x001A, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x001B, DMI type 129, 16 bytes
OEM-specific Type
Header and Data:
81 10 1B 00 01 01 02 01 00 00 00 01 00 00 08 01
Strings:
Intel_ASF_001
Intel_ASF_001
Handle 0x001C, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 1C 00 5A 5A
Handle 0x001D, DMI type 127, 4 bytes
End Of Table
