Hi,
I am not able to start the kernel on a Panasonic Toughbook CF-52 successfully
with ACPI enabled. Only acpi=off or acpi=ht works. ACPI also fails with the
latest linux-acpi-2.6 git checkout from today. The attached file
failed_boot.txt shows the kernel log. After the last line the boot process
does not proceed.
Interestingly, I managed to boot the system twice a few days ago. The
successful dmesg output shows the attached file dmesg_acpi_osi_test. It shows
a lot of ACPI errors, though.
Please let me know if you need more information or how I can help to debug
this problem further.
--
Sebastian
Linux version 2.6.24 ([EMAIL PROTECTED]) (gcc version 4.1.1 (Gentoo 4.1.1-r3))
#1 SMP PREEMPT Wed Feb 6 15:36:59 CET 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6c0000 (usable)
BIOS-e820: 000000003f6c0000 - 000000003f6d1000 (ACPI NVS)
BIOS-e820: 000000003f6d1000 - 0000000040000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
118MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f77a0] 000f77a0
Entering add_active_range(0, 0, 259776) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 259776
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 259776
On node 0 totalpages: 259776
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 237 pages used for memmap
HighMem zone: 30163 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP 000F7770, 0024 (r2 MATBIO)
ACPI: XSDT 3F6C4F19, 007C (r1 MATBIO CF52-1LA 6040000 MEI 0)
ACPI: FACP 3F6CDC60, 00F4 (r3 MATBIO CF52-1LA 6040000 MEI 1)
ACPI: DSDT 3F6C62C1, 791B (r1 MATBIO CF52-1LA 6040000 MSFT 3000000)
ACPI: FACS 3F6D0FC0, 0040
ACPI: HPET 3F6CDD54, 0038 (r1 MATBIO CF52-1LA 6040000 MEI 5A)
ACPI: SLIC 3F6CDD8C, 0176 (r1 MATBIO CF52-1LA 6040000 MEI 0)
ACPI: APIC 3F6CDF02, 0068 (r1 MATBIO CF52-1LA 6040000 MEI 0)
ACPI: MCFG 3F6CDF6A, 003C (r1 MATBIO CF52-1LA 6040000 MEI 0)
ACPI: BOOT 3F6CDFA6, 0028 (r1 MATBIO CF52-1LA 6040000 MEI 1)
ACPI: TCPA 3F6CDFCE, 0032 (r1 MATBIO CF52-1LA 6040000 MEI 1)
ACPI: SSDT 3F6C5FC6, 02FB (r1 MATBIO CF52-1LA 1000 MEI 20050624)
ACPI: SSDT 3F6C5521, 025F (r1 MATBIO CF52-1LA 3000 MEI 20050624)
ACPI: SSDT 3F6C547B, 00A6 (r1 MATBIO CF52-1LA 3000 MEI 20050624)
ACPI: SSDT 3F6C4F95, 04E6 (r1 MATBIO CF52-1LA 3000 MEI 20050624)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257747
Kernel command line: root=/dev/sda6 vga=0x318 acpi_osi=Linux
ACPI: Added _OSI(Linux)
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1795.531 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024748k/1039104k available (2814k kernel code, 13732k reserved, 1132k
data, 216k init, 121600k highmem)
virtual kernel memory layout:
fixmap : 0xfff9a000 - 0xfffff000 ( 404 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04e2000 - 0xc0518000 ( 216 kB)
.data : 0xc03bfaa2 - 0xc04dab18 (1132 kB)
.text : 0xc0100000 - 0xc03bfaa2 (2814 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 3593.86 BogoMIPS (lpj=1796934)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 825 Objects with 66 Devices 269 Methods 26 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 14 Objects with 3 Devices 8 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3590.94 BogoMIPS (lpj=1795472)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
Total of 2 processors activated (7184.81 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 164 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 3 Runtime GPEs
in this block
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI Error (exregion-0164): Could not map memory at F7C1E118000001AC, size 1000
[20070126]
ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for
[SystemMemory] [20070126]
ACPI Exception (dswexec-0462): AE_NO_MEMORY, While resolving operands for
[LEqual] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.GFX0.ILID]
(Node f7c143c0), AE_NO_MEMORY
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_._REG] (Node f7c157e0), AE_NO_MEMORY
Completing Region/Field/Buffer/Package
initialization:................................................................
Initialized 20/26 Regions 0/0 Fields 28/29 Buffers 16/24 Packages (872 nodes)
Initializing Device/Processor/Thermal objects by executing _INI
methods:<5>ACPI: BIOS _OSI(Linux) query honored via cmdline
ACPI: DMI System Vendor: Matsushita Electric Industrial Co.,Ltd.
ACPI: DMI Product Name: CF-52CCABVBG
ACPI: DMI Product Version: 001
ACPI: DMI Board Name: CF52-1LA
ACPI: DMI BIOS Vendor: Phoenix Technologies Ltd.
ACPI: DMI BIOS Date: 10/23/2007
ACPI: Please send DMI info above to [email protected]
ACPI Error (exregion-0164): Could not map memory at F7C1E11800000310, size 1000
[20070126]
ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for
[SystemMemory] [20070126]
ACPI Exception (dswexec-0462): AE_NO_MEMORY, While resolving operands for [And]
[20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.GFX0.INIG]
(Node f7c143f0), AE_NO_MEMORY
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._INI] (Node
f7c12228), AE_NO_MEMORY
ACPI Exception (nsinit-0564): AE_NO_MEMORY, during \_SB_._INI._INI execution
[20070126]
ACPI: EC: missing OBF confirmation, don't expect it any longer.
ACPI: EC: missing write data confirmation, don't expect it any longer.
.<5>ACPI: BIOS _OSI(Linux) query honored via cmdline
ACPI: DMI System Vendor: Matsushita Electric Industrial Co.,Ltd.
ACPI: DMI Product Name: CF-52CCABVBG
ACPI: DMI Product Version: 001
ACPI: DMI Board Name: CF52-1LA
ACPI: DMI BIOS Vendor: Phoenix Technologies Ltd.
ACPI: DMI BIOS Date: 10/23/2007
ACPI: Please send DMI info above to [email protected]
..
Executed 3 _INI methods requiring 1 _STA executions (examined 75 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Error (exregion-0164): Could not map memory at F7C1E11800000410, size F0
[20070126]
ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for
[SystemMemory] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.MOU3._STA] (Node f7c17198), AE_NO_MEMORY
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
ACPI: PCI Interrupt Link [LNKG] (IRQs *9)
ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
ACPI Error (exregion-0164): Could not map memory at F7C1E11800000410, size F0
[20070126]
ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for
[SystemMemory] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.MOU3._STA] (Node f7c17198), AE_NO_MEMORY
ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.LPCB.MOU3._STA]
(Node f7c17198), AE_NO_MEMORY
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
hpet0: 3 64-bit timers, 14318180 Hz
Time: tsc clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: iomem range 0xcee00-0xcefff has been reserved
system 00:02: ioport range 0x900-0x91f has been reserved
system 00:02: ioport range 0x92c-0x97f has been reserved
system 00:02: ioport range 0xfe00-0xfe01 has been reserved
system 00:02: iomem range 0xff000000-0xffffffff could not be reserved
system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:06: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:06: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:06: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:06: iomem range 0xf8000000-0xfbffffff could not be reserved
system 00:06: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:06: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:06: iomem range 0xfef00000-0xfef03fff has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 2000-3fff
MEM window: 0xd0000000-0xd3ffffff
PREFETCH window: 0x00000000d8000000-0x00000000dbffffff
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: 0xfc500000-0xfc5fffff
PREFETCH window: disabled.
PCI: Bus 15, cardbus bridge: 0000:0e:00.0
IO window: 0x00004000-0x000040ff
IO window: 0x00004400-0x000044ff
PREFETCH window: 0x54000000-0x57ffffff
MEM window: 0x58000000-0x5bffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: 0xfc200000-0xfc4fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 21 (level, low) -> IRQ 21
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x46 set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
NTFS driver 2.1.29 [Flags: R/O].
fuse init (API version 7.9)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:00:02.0: Boot video device
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total
7616k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BATA] (battery absent)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 3F6C5CC1, 023D (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00F7) - 6 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 3F6C5780, 04BC (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00F8) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F6C5EFE, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 0006) - 4 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 3F6C5C3C, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 0007) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Error (exregion-0164): Could not map memory at F7C1E11800000410, size F0
[20070126]
ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for
[SystemMemory] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.MOU3._STA] (Node f7c17198), AE_NO_MEMORY
ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.LPCB.MOU3._STA]
(Node f7c17198), AE_NO_MEMORY
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (47 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (49 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.6.0 20060119 on minor 0
intelfb: Framebuffer driver for Intel(R)
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Clocksource tsc unstable (delta = -362918925 ns)
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:0b:97:d8:d8:73
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
ICH8M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:PIO
ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:PIO, hdd:PIO
Probing IDE interface ide0...
hda: TEAC DV-W28EC, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide2: I/O resource 0x0-0x7 not free.
ide2: ports already in use, skipping probe
ide3: I/O resource 0x0-0x7 not free.
ide3: ports already in use, skipping probe
ide4: I/O resource 0x0-0x7 not free.
ide4: ports already in use, skipping probe
ide5: I/O resource 0x0-0x7 not free.
ide5: ports already in use, skipping probe
ide6: I/O resource 0x0-0x7 not free.
ide6: ports already in use, skipping probe
ide7: I/O resource 0x0-0x7 not free.
ide7: ports already in use, skipping probe
ide8: I/O resource 0x0-0x7 not free.
ide8: ports already in use, skipping probe
ide9: I/O resource 0x0-0x7 not free.
ide9: ports already in use, skipping probe
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfc825100 irq 19
ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfc825180 irq 19
ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfc825200 irq 19
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: FUJITSU MHY2080BH, 0043000B, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2080B 0043 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
ACPI: PCI Interrupt 0000:0e:00.1[B] -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fc401000-fc4017ff]
Max Packet=[2048] IR/IT contexts=[4/4]
ieee1394: raw1394: /dev/raw1394 device initialized
Yenta: CardBus bridge found at 0000:0e:00.0 [10f7:8338]
Yenta: ISA IRQ mask 0x04b8, PCI irq 21
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#0e) from #0f to #12
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc4fffff
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc825800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc825c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ieee1394: Host added: ID:BUS[0-00:1023] GUID[008045890009ac6a]
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 5-2: new low speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:K101] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot
with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:0e:00.2 [1180:0822] (rev 15)
ACPI: PCI Interrupt 0000:0e:00.2[D] -> GSI 23 (level, low) -> IRQ 23
sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI at 0xfc401800 irq 23 DMA
input: USB Optical Mouse as /class/input/input4
input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI No-Shortcut mode
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
kjournald starting. Commit interval 5 seconds
Freeing unused kernel memory: 216k freed
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for
[EmbeddedControl] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC87] (Node f7c15f48), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC86] (Node f7c15f18), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC01] (Node f7c15d50), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ECPF] (Node
f7c10ac8), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR]
(Node f7c10cc0), AE_TIME
ACPI Exception (ac-0135): AE_TIME, Error reading AC Adapter state [20070126]
EXT3 FS on sda6, internal journal
Adding 1357452k swap on /dev/sda5. Priority:-1 extents:1 across:1357452k
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for
[EmbeddedControl] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC87] (Node f7c15f48), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC86] (Node f7c15f18), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC02] (Node f7c15d68), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ECPF] (Node
f7c10ac8), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BATA._STA]
(Node f7c10c30), AE_TIME
ACPI Exception (battery-0306): AE_ERROR, Evaluating _STA [20070126]
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for
[EmbeddedControl] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC87] (Node f7c15f48), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC86] (Node f7c15f18), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC01] (Node f7c15d50), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ECPF] (Node
f7c10ac8), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR]
(Node f7c10cc0), AE_TIME
ACPI Exception (ac-0135): AE_TIME, Error reading AC Adapter state [20070126]
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for
[EmbeddedControl] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC87] (Node f7c15f48), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC86] (Node f7c15f18), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC01] (Node f7c15d50), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ECPF] (Node
f7c10ac8), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR]
(Node f7c10cc0), AE_TIME
ACPI Exception (ac-0135): AE_TIME, Error reading AC Adapter state [20070126]
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for
[EmbeddedControl] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC87] (Node f7c15f48), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC86] (Node f7c15f18), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC01] (Node f7c15d50), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ECPF] (Node
f7c10ac8), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR]
(Node f7c10cc0), AE_TIME
ACPI Exception (ac-0135): AE_TIME, Error reading AC Adapter state [20070126]
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for
[EmbeddedControl] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC87] (Node f7c15f48), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC86] (Node f7c15f18), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC01] (Node f7c15d50), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ECPF] (Node
f7c10ac8), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR]
(Node f7c10cc0), AE_TIME
ACPI Exception (ac-0135): AE_TIME, Error reading AC Adapter state [20070126]
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for
[EmbeddedControl] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC87] (Node f7c15f48), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC86] (Node f7c15f18), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC01] (Node f7c15d50), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ECPF] (Node
f7c10ac8), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR]
(Node f7c10cc0), AE_TIME
ACPI Exception (ac-0135): AE_TIME, Error reading AC Adapter state [20070126]
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for
[EmbeddedControl] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC87] (Node f7c15f48), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC86] (Node f7c15f18), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC01] (Node f7c15d50), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ECPF] (Node
f7c10ac8), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR]
(Node f7c10cc0), AE_TIME
ACPI Exception (ac-0135): AE_TIME, Error reading AC Adapter state [20070126]
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for
[EmbeddedControl] [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC87] (Node f7c15f48), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC86] (Node f7c15f18), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.LPCB.EC0_.EC01] (Node f7c15d50), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ECPF] (Node
f7c10ac8), AE_TIME
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR]
(Node f7c10cc0), AE_TIME
ACPI Exception (ac-0135): AE_TIME, Error reading AC Adapter state [20070126]
# dmidecode 2.9
SMBIOS 2.4 present.
46 structures occupying 1685 bytes.
Table at 0x000DC010.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies Ltd.
Version: V1.54L21
Release Date: 10/23/2007
Address: 0xE50B0
Runtime Size: 110416 bytes
ROM Size: 1024 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
3.5"/720 KB floppy services are supported (int 13h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 1.54
Firmware Revision: 1.80
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Matsushita Electric Industrial Co.,Ltd.
Product Name: CF-52CCABVBG
Version: 001
Serial Number: 7LTCB27246
UUID: D7A8DB86-686D-53BE-A5C9-C0F2C1C80261
Wake-up Type: Power Switch
SKU Number: CF-52CCABVBG
Family: CF52-1LA
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Matsushita Electric Industrial Co.,Ltd.
Product Name: CF52-1LA
Version: 001
Serial Number: None
Handle 0x0003, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Matsushita Electric Industrial Co.,Ltd.
Type: Notebook
Lock: Not Present
Version: 001
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: IC1
Type: Central Processor
Family: Other
Manufacturer: GenuineIntel
ID: FD 06 00 00 FF FB EB BF
Version: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz
Voltage: 1.2 V
External Clock: 200 MHz
Max Speed: 1800 MHz
Current Speed: 1800 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN15
Internal Connector Type: None
External Reference Designator: USB 0
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN16
Internal Connector Type: None
External Reference Designator: USB 1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN29
Internal Connector Type: None
External Reference Designator: USB 2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN30
Internal Connector Type: None
External Reference Designator: USB 3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN10
Internal Connector Type: None
External Reference Designator: PC Card
External Connector Type: 68 Pin Dual Inline
Port Type: Cardbus
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JK3004
Internal Connector Type: None
External Reference Designator: MIC
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JK3003
Internal Connector Type: None
External Reference Designator: Headphone
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN4001
Internal Connector Type: None
External Reference Designator: SERIAL
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN28
Internal Connector Type: None
External Reference Designator: EXT.DISPLAY
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN2001
Internal Connector Type: None
External Reference Designator: LAN
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN4201
Internal Connector Type: None
External Reference Designator: Modem
External Connector Type: RJ-11
Port Type: Modem Port
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN13
Internal Connector Type: None
External Reference Designator: Wireless LAN
External Connector Type: None
Port Type: Network Port
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN9
Internal Connector Type: None
External Reference Designator: 1394
External Connector Type: IEEE 1394
Port Type: Firewire (IEEE P1394)
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN7
Internal Connector Type: None
External Reference Designator: Bluetooth
External Connector Type: None
Port Type: Network Port
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN31
Internal Connector Type: None
External Reference Designator: Port Replicator
External Connector Type: Proprietary
Port Type: Other
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN4301
Internal Connector Type: None
External Reference Designator: SD Card
External Connector Type: Proprietary
Port Type: Other
Handle 0x0017, DMI type 9, 13 bytes
System Slot Information
Designation: PC Card
Type: 32-bit PC Card (PCMCIA)
Current Usage: Unknown
Length: Other
ID: Adapter 0, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
PME signal is supported
Hot-plug devices are supported
Handle 0x0018, DMI type 126, 13 bytes
Inactive
Handle 0x0019, DMI type 9, 13 bytes
System Slot Information
Designation: ExpressCard
Type: x1 PCI Express
Current Usage: Unknown
Length: Other
ID: 0
Characteristics:
3.3 V is provided
Hot-plug devices are supported
Handle 0x001A, DMI type 10, 10 bytes
On Board Device 1 Information
Type: Video
Status: Enabled
Description: Intel 82G965
On Board Device 2 Information
Type: Sound
Status: Enabled
Description: Analog Devices AD1884
On Board Device 3 Information
Type: Ethernet
Status: Enabled
Description: Intel 82566MM
Handle 0x001B, DMI type 11, 5 bytes
OEM Strings
String 1: 4yv7r4hKAY8MI
String 2: vxSDCx5UrDEzw
String 3: iu7ZWjnD3U1L+
Handle 0x001C, DMI type 12, 5 bytes
System Configuration Options
Option 1: DSN:K41ET7B256SEFUJITSUMHY2080BH
Option 2: DSN:M4 70T2953EZ3-CE6 3D500D11
Option 3: DSN:
Option 4: SMI:00B2C1
Handle 0x001D, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 2
en|US|iso8859-1
ja|JP|unicode-1
Currently Installed Language: en|US|iso8859-1
Handle 0x001E, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x001F, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: Flash Memory
Error Correction Type: None
Maximum Capacity: 1 MB
Error Information Handle: Not Provided
Number Of Devices: 1
Handle 0x0020, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM 1
Bank Locator: DIMM 1
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: Not Specified
Serial Number: 3D500D11
Asset Tag: Not Specified
Part Number: M4 70T2953EZ3-CE6
Handle 0x0021, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM 2
Bank Locator: DIMM 2
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0022, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001F
Error Information Handle: No Error
Total Width: 8 bits
Data Width: 8 bits
Size: 1024 kB
Form Factor: TSOP
Set: None
Locator: Flash ROM
Bank Locator: Flash ROM
Type: Flash
Type Detail: Non-Volatile
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0023, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x001E
Partition Width: 0
Handle 0x0024, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x000FFF00000
Ending Address: 0x000FFFFFFFF
Range Size: 1 MB
Physical Array Handle: 0x001F
Partition Width: 0
Handle 0x0025, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0020
Memory Array Mapped Address Handle: 0x0023
Partition Row Position: 1
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0026, DMI type 126, 19 bytes
Inactive
Handle 0x0027, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x000FFF00000
Ending Address: 0x000FFFFFFFF
Range Size: 1 MB
Physical Device Handle: 0x0022
Memory Array Mapped Address Handle: 0x0024
Partition Row Position: 1
Handle 0x0028, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: PS/2
Buttons: 2
Handle 0x0029, DMI type 126, 7 bytes
Inactive
Handle 0x002A, DMI type 22, 26 bytes
Portable Battery
Location: in the front, left-hand side
Manufacturer: Panasonic
Name: Not Specified
Chemistry: Lithium Ion
Design Capacity: Unknown
Design Voltage: Unknown
SBDS Version: Not Specified
Maximum Error: 0%
SBDS Serial Number: 0000
SBDS Manufacture Date: 1980-01-01
OEM-specific Information: 0x00000000
Handle 0x002B, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Disabled
Front Panel Reset Status: Not Implemented
Handle 0x002C, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x002D, DMI type 127, 4 bytes
End Of Table
Linux version 2.6.24 ([EMAIL PROTECTED]) (gcc version 4.1.1 (Gentoo 4.1.1-r3))
#1 SMP PREEMPT Thu Feb 7 16:30:34 CET 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6c0000 (usable)
BIOS-e820: 000000003f6c0000 - 000000003f6d1000 (ACPI NVS)
BIOS-e820: 000000003f6d1000 - 0000000040000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
118MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f77a0] 000f77a0
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 259776
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 259776
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP 000F7770, 0024 (r2 MATBIO)
ACPI: XSDT 3F6C4F19, 007C (r1 MATBIO CF52-1LA 6040000 MEI 0)
ACPI: FACP 3F6CDC60, 00F4 (r3 MATBIO CF52-1LA 6040000 MEI 1)
ACPI: DSDT 3F6C62C1, 791B (r1 MATBIO CF52-1LA 6040000 MSFT 3000000)
ACPI: FACS 3F6D0FC0, 0040
ACPI: HPET 3F6CDD54, 0038 (r1 MATBIO CF52-1LA 6040000 MEI 5A)
ACPI: SLIC 3F6CDD8C, 0176 (r1 MATBIO CF52-1LA 6040000 MEI 0)
ACPI: APIC 3F6CDF02, 0068 (r1 MATBIO CF52-1LA 6040000 MEI 0)
ACPI: MCFG 3F6CDF6A, 003C (r1 MATBIO CF52-1LA 6040000 MEI 0)
ACPI: BOOT 3F6CDFA6, 0028 (r1 MATBIO CF52-1LA 6040000 MEI 1)
ACPI: TCPA 3F6CDFCE, 0032 (r1 MATBIO CF52-1LA 6040000 MEI 1)
ACPI: SSDT 3F6C5FC6, 02FB (r1 MATBIO CF52-1LA 1000 MEI 20050624)
ACPI: SSDT 3F6C5521, 025F (r1 MATBIO CF52-1LA 3000 MEI 20050624)
ACPI: SSDT 3F6C547B, 00A6 (r1 MATBIO CF52-1LA 3000 MEI 20050624)
ACPI: SSDT 3F6C4F95, 04E6 (r1 MATBIO CF52-1LA 3000 MEI 20050624)
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257747
Kernel command line: root=/dev/sda6 console=ttyS0,115200 console=tty0
acpi_osi=Linux
ACPI: Added _OSI(Linux)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1795.529 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024612k/1039104k available (2819k kernel code, 13868k reserved, 1135k
data, 216k init, 121600k highmem)
virtual kernel memory layout:
fixmap : 0xfff9a000 - 0xfffff000 ( 404 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04e4000 - 0xc051a000 ( 216 kB)
.data : 0xc03c0eca - 0xc04dcb18 (1135 kB)
.text : 0xc0100000 - 0xc03c0eca (2819 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3594.21 BogoMIPS (lpj=1797109)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 825 Objects with 66 Devices 269 Methods 26 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 14 Objects with 3 Devices 8 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3590.95 BogoMIPS (lpj=1795478)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
Total of 2 processors activated (7185.17 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 164 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 3 Runtime GPEs
in this block
ACPI: EC: non-query interrupt received, switching to interrupt mode
