applied.

thanks,
-len

On Saturday 23 February 2008 00:41, David Brownell wrote:
> Minor cleanups to acpi_pci_set_power_state():  use the ACPI and PCI
> state symbols to make clear that a mapping is being done between PCI
> and ACPI states, instead of using magic numbers.  For paranoia's sake,
> report any errors.  Save five bytes (x86_64) too.
> 
> Signed-off-by: David Brownell <[EMAIL PROTECTED]>
> ---
> Extracted from the "teach ACPI how to use driver model wakeup flags"
> patch series ... who knows, maybe that could be merged someday.
> 
>  drivers/pci/pci-acpi.c |   24 ++++++++++++++++--------
>  1 file changed, 16 insertions(+), 8 deletions(-)
> 
> --- g26.orig/drivers/pci/pci-acpi.c   2008-02-22 19:26:58.000000000 -0800
> +++ g26/drivers/pci/pci-acpi.c        2008-02-22 20:37:14.000000000 -0800
> @@ -272,21 +272,29 @@ static int acpi_pci_set_power_state(stru
>  {
>       acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
>       acpi_handle tmp;
> -     static int state_conv[] = {
> -             [0] = 0,
> -             [1] = 1,
> -             [2] = 2,
> -             [3] = 3,
> -             [4] = 3
> +     static const u8 state_conv[] = {
> +             [PCI_D0] = ACPI_STATE_D0,
> +             [PCI_D1] = ACPI_STATE_D1,
> +             [PCI_D2] = ACPI_STATE_D2,
> +             [PCI_D3hot] = ACPI_STATE_D3,
> +             [PCI_D3cold] = ACPI_STATE_D3
>       };
> -     int acpi_state = state_conv[(int __force) state];
>  
>       if (!handle)
>               return -ENODEV;
>       /* If the ACPI device has _EJ0, ignore the device */
>       if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
>               return 0;
> -     return acpi_bus_set_power(handle, acpi_state);
> +
> +     switch (state) {
> +     case PCI_D0:
> +     case PCI_D1:
> +     case PCI_D2:
> +     case PCI_D3hot:
> +     case PCI_D3cold:
> +             return acpi_bus_set_power(handle, state_conv[state]);
> +     }
> +     return -EINVAL;
>  }
>  
>  
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to