Pada 09:15 10/04/2002 +0700, CVN menulis: >Rekan sekalian, > >Maaf say newbie nich.... >Aku coba install Linux Redhat 6.2 di PC-office dengan HD 20GB, >pada waktu proses partisi, nggak bisa melulu, katanya space kebesaran?? >Sementara di PC rumah kok mau ya.. dengan HD 10GB ( >Apa benar Redhat 6.2 nggak dukung untuk HD 20GB ???? > >Error pada saat menjalankan Diskdruid sbb > " There are currently unallocated partitionn(s). > Present in the list of requested partition > The unlocated partition(s) are shown below, > along with the reason they were not allocated " > / Boot partiton too big > >padahal partisi yang sisa 3.6 GB lagi, >dan yang lainnya udah dipake ama FAT32, 3 partisi >Partisi primer (1) ==> 6.2 GB ( FAT32 ) >Partisi Extended 10 GB ==> Partisi 2 & 3 , masing2 5 GB ( FAT32 ) >adapun spec Hard Disk saya : >Merk = maxtor >Cylinder = 1024 >Head = 255 >Sector = 63 >CHS Capacity = 8422 MB >Max LBA Capacity = 20466 MB > >Terima kasih sebelumnya > >Salam
Coba baca manual instalasi redhat dari (Mungkin sama kasusnya dengan RedHat 7.2) : http://www.redhat.com/docs/manuals/linux/RHL-7.2-Manual/install-guide/s1-guimode-partitioning.html If your hard drive is more than 1024 cylinders (and your system was manufactured more than two years ago), you may need to create a /boot partition if you want the / (root) partition to use all of the remaining space on your hard drive. Sepertinya anda perlu membuat partisi /boot yang berukuran lebih kecil. Biasanya 50 MB sudah cukup. Salam, Suryanto Rachmat -- Utk berhenti langganan, kirim email ke [EMAIL PROTECTED] Informasi arsip di http://www.linux.or.id/milis.php3
