Hi, on my as255 with RH-linux 6.0 I've installed the svga-server for the supported CirrusLogic 5664. Unfortunately it won't start, output appended down below. I tried several settings in the XF86Config, just the same. 'Cause I dont't have any internal knowledge about the alpha, I don't know what the reason might be. Does anybody know? Thank you (and please apologize for sending the large server output) V. Zank (Berlin) > > ############### output of /proc/pci: > > PCI devices found: > Bus 0, device 6, function 0: > SCSI storage controller: NCR 53c810 (rev 17). > Medium devsel. IRQ 11. Master Capable. Latency=32. Min > Gnt=8.Max Lat=64. > I/O at 0x8000 [0x8001]. > Non-prefetchable 32 bit memory at 0x4200000 [0x4200000]. > Bus 0, device 7, function 0: > Non-VGA device: Intel 82378IB (rev 67). > Medium devsel. Master Capable. No bursts. > Bus 0, device 13, function 0: > VGA compatible controller: Cirrus Logic GD 5446 (rev 0). > Medium devsel. IRQ 10. > Non-prefetchable 32 bit memory at 0x5000000 [0x5000000]. > Bus 0, device 14, function 0: > Ethernet controller: DEC DC21040 (rev 36). > Medium devsel. Fast back-to-back capable. IRQ 15. Master > Capable. Latency=32. > I/O at 0x8800 [0x8801]. > Non-prefetchable 32 bit memory at 0x6000000 [0x6000000]. > > ############### output of X -probeonly: > > XFree86 Version 3.3.3.1 / X Window System > (protocol Version 11, revision 0, vendor release 6300) > Release Date: January 4 1999 > If the server is older than 6-12 months, or if your card is newer > than the above date, look for a newer version before reporting > problems. (see http://www.XFree86.Org/FAQ) > Operating System: Linux 2.1.131 alpha [ELF] > Configured drivers: > SVGA: server for SVGA graphics adaptors (Patchlevel 0): > mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, > s3_virge > (using VT number 7) > > XF86Config: /usr/X11R6/lib/X11/XF86Config > (**) stands for supplied, (--) stands for probed/default values > (**) XKB: keycodes: "xfree86" > (**) XKB: types: "default" > (**) XKB: compat: "default" > (**) XKB: symbols: "us(pc101)" > (**) XKB: geometry: "pc" > (**) XKB: rules: "xfree86" > (**) XKB: model: "pc101" > (**) XKB: layout: "us" > (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 > (**) Mouse: 3 button emulation (timeout: 50ms) > (**) SVGA: Graphics device ID: "GD 5446" > (**) SVGA: Monitor ID: "Nokia 445M" > (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. > (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. > (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. > (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. > (**) FontPath set to "unix/:-1" > system type: Avanti > system vari: 0 > cpu model: EV4 > ioperm: turn_on 1 io.base 0 > ioperm: mmap of len 0x200000 returned 0x20000588000 > ioperm: mprotect returned 0 > (--) SVGA: PCI: Cirrus Logic GD5446 rev 0, Memory @ 0x05000000 > > *** None of the configured devices were detected.*** > >
