On Mon, 2013-08-05 at 16:02 -0700, Rohit Vaswani wrote:
> This patch adds basic board support for MSM8974 Dragonboard
> which belongs to the Snapdragon 800 family.
> For now, just support a basic machine with device tree.
>
> Signed-off-by: Rohit Vaswani <rvasw...@codeaurora.org>
> ---
> arch/arm/boot/dts/Makefile | 3 ++-
> arch/arm/boot/dts/msm8974-db.dts | 26 ++++++++++++++++++++++++++
> arch/arm/mach-msm/Kconfig | 21 ++++++++++++++++++---
> arch/arm/mach-msm/Makefile | 1 +
> arch/arm/mach-msm/board-dt-8974.c | 23 +++++++++++++++++++++++
> 5 files changed, 70 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/boot/dts/msm8974-db.dts
> create mode 100644 arch/arm/mach-msm/board-dt-8974.c
Thanks.
Tested-by: Ivan T. Ivanov <iiva...@mm-sol.com>
Attached patch enables earlyprink for this board.
[920] booting linux @ 0x8000, ramdisk @ 0x2000000 (1067699), tags/device tree @
0x1e00000
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.11.0-rc4-00003-g7c8394e (iivanov@dev) (gcc
version 4.6.3 (GCC) ) #502 SMP PREEMPT Tue Aug 6 12:09:07 EEST3
[ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Qualcomm MSM (Flattened Device Tree), model: Qualcomm
MSM8974 Dragonboard
....
>From 7c8394ea8d926cc90c90c76aa48c5cee88f2f149 Mon Sep 17 00:00:00 2001
From: "Ivan T. Ivanov" <iiva...@mm-sol.com>
Date: Wed, 5 Jun 2013 17:35:40 +0300
Subject: [PATCH] msm: Add low-level debugging via MSM 8974 UART
Enable low-level debug print routines to direct their
output to the serial port on MSM 8974 devices.
Signed-off-by: Ivan T. Ivanov <iiva...@mm-sol.com>
---
arch/arm/Kconfig.debug | 8 ++++++++
arch/arm/mach-msm/board-dt-8974.c | 2 ++
arch/arm/mach-msm/include/mach/msm_iomap.h | 4 ++++
3 files changed, 14 insertions(+)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 583f4a0..4a8584f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -323,6 +323,14 @@ choice
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
+ config DEBUG_MSM8974_UART
+ bool "Kernel low-level debugging messages via MSM 8974 UART"
+ depends on ARCH_MSM8974
+ select MSM_HAS_DEBUG_UART_HS
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on MSM 8974 devices.
+
config DEBUG_MVEBU_UART
bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
depends on ARCH_MVEBU
diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c
index 697623e..0ce016a 100644
--- a/arch/arm/mach-msm/board-dt-8974.c
+++ b/arch/arm/mach-msm/board-dt-8974.c
@@ -12,6 +12,7 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
static const char * const msm8974_dt_match[] __initconst = {
"qcom,msm8974-db",
@@ -20,4 +21,5 @@ static const char * const msm8974_dt_match[] __initconst = {
DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)")
.dt_compat = msm8974_dt_match,
+ .map_io = debug_ll_io_init,
MACHINE_END
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index c56e81f..7e08189 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -59,6 +59,10 @@
#define MSM_DEBUG_UART_BASE 0xE1000000
#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
#endif
+#ifdef CONFIG_DEBUG_MSM8974_UART
+#define MSM_DEBUG_UART_BASE 0xfa71e000
+#define MSM_DEBUG_UART_PHYS 0xf991e000
+#endif
/* Virtual addresses shared across all MSM targets. */
#define MSM_CSR_BASE IOMEM(0xE0001000)
--
1.7.9.5
