Hi Kumar,
On Thu, 2013-08-29 at 10:28 -0500, Kumar Gala wrote:
> On Aug 29, 2013, at 8:27 AM, Ivan T. Ivanov wrote:
>
> > From: "Ivan T. Ivanov" <iiva...@mm-sol.com>
> >
> > The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
> > provide input and output FIFO's for it. I2C controller can operate
> > as master with supported bus speeds of 100Kbps and 400Kbps.
> >
> > Signed-off-by: Ivan T. Ivanov <iiva...@mm-sol.com>
> > ---
> > Documentation/devicetree/bindings/i2c/i2c-qup.txt | 99
> > +++++++++++++++++++++
> > 1 file changed, 99 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qup.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/i2c-qup.txt
> > b/Documentation/devicetree/bindings/i2c/i2c-qup.txt
> > new file mode 100644
> > index 0000000..c682726
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/i2c-qup.txt
> > @@ -0,0 +1,99 @@
> > +Qualcomm Universal Periferial (QUP) I2C controller
>
> [nit: remove extra spaces before ':']
ok.
>
> > +
> > +Required properties:
> > + - compatible : should be "qcom,i2c-qup"
> > + - reg : Offset and length of the register region for the device
> > + - interrupts : core interrupt
> > +
> > + - pinctrl-names: Should contain only one value - "default".
> > + - pinctrl-0: Should specify pin control group used for this controller.
> > +
> > + - clocks : phandles to clock instances of the device tree nodes
> > + - clock-names :
> > + "core" : Allow access to FIFO buffers and registers
> > + "iface" : Clock used by QUP interface
> > +
> > + - #address-cells : should be <1> Address cells for I2C device address
> > + - #size-cells : should be <0> I2C addresses have no size component.
> > +
> > +Optional properties :
> > + - Child nodes conforming to i2c bus binding
> > + - clock-frequency : Desired I2C bus clock frequency in Hz. If
> > + not set thedefault frequency is 100kHz
> > + - qcom,src-freq : Frequency of the source clocking this bus in Hz.
> > + Divider value is set based on soruce-frequency and
> > + desired I2C bus frequency. If this value is not
> > + provided, the source clock is assumed to be running
> > + at 19.2 MHz.
>
> I'd spell out frequency instead of 'freq' to be consistent with
> 'clock-frequency'
ok.
>
> Is the frequency of the 'iface' clock? Can we not use clk_get_rate?
It is for 'core' clock. I think that for higher I2C bus frequencies,
'core' clock have to be higher, but I am not sure what is relation.
>
> > +
> > +Aliases: An alias may optionally be used to bind the I2C controller
> > +to bus number. Aliases are of the form i2c<n> where <n> is an integer
> > +representing the bus number to use.
> > +
> > +Example:
> > +
> > + aliases {
> > + i2c0 = &i2c_A;
> > + i2c1 = &i2c_B;
> > + i2c2 = &i2c_C;
> > + };
>
> What is the purpose here?
Define on which I2C bus this controller operate. I2C client
drivers usually do i2c_get_adapter(bus_number) before its
registration. This is for drivers before invention of
of_i2c_register_devices(), I believe.
Thanks,
Ivan
>
> > +
> > + i2c_A: i2c@f9967000 {
> > + compatible = "qcom,i2c-qup";
> > + reg = <0Xf9967000 0x1000>;
> > + interrupts = <0 105 0>;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c0_data>;
> > +
> > + clocks = <&core>, <&iface>;
> > + clock-names = "core", "iface";
> > +
> > + clock-frequency = <100000>;
> > + qcom,src-freq = <50000000>;
> > + status = "disabled";
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + dummy@60 {
> > + compatible = "dummy";
> > + reg = <0x60>;
> > + };
> > + };
> > +
> > + i2c_B: i2c@f9923000 {
> > + compatible = "qcom,i2c-qup";
> > + reg = <0xf9923000 0x1000>;
> > + interrupts = <0 95 0>;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c1_data>;
> > +
> > + clocks = <&core>, <&iface>;
> > + clock-names = "core", "iface";
> > +
> > + clock-frequency = <100000>;
> > + qcom,src-freq = <19200000>;
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + i2c_C: i2c@f9924000 {
> > + compatible = "qcom,i2c-qup";
> > + reg = <0xf9924000 0x1000>;
> > + interrupts = <0 96 0>;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c5_data>;
> > +
> > + clocks = <&core>, <&iface>;
> > + clock-names = "core", "iface";
> > +
> > + clock-frequency = <100000>;
> > + qcom,src-freq = <50000000>;
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > --
> > 1.7.9.5
>
>
> - k
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
