On Mon, Apr 28, 2014 at 04:34:20PM +0300, Ivan T. Ivanov wrote:
> From: Tim Bird <tbird...@gmail.com>
>
> Select the secondary PHY using the TCSR register, if phy-num=1
> in the DTS (or phy_number is set in the platform data). The
> SOC has 2 PHYs which can be used with the OTG port, and this
> code allows configuring the correct one.
>
> Note: This resolves the problem I was seeing where I couldn't
> get the USB driver working at all on a dragonboard, from cold
> boot. This patch depends on patch 5/14 from Ivan's msm USB
> patch set. It does not use DT for the register address, as
> there's no evidence that this address changes between SoC
> versions.
>
> Signed-off-by: Tim Bird <tim.b...@sonymobile.com>
> ---
> drivers/usb/phy/phy-msm-usb.c | 14 ++++++++++++++
> include/linux/usb/msm_hsusb_hw.h | 3 +++
> 2 files changed, 17 insertions(+)
>
> diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
> index db8d963..9437bcf 100644
> --- a/drivers/usb/phy/phy-msm-usb.c
> +++ b/drivers/usb/phy/phy-msm-usb.c
> @@ -1489,6 +1489,7 @@ static int msm_otg_probe(struct platform_device *pdev)
> struct resource *res;
> struct msm_otg *motg;
> struct usb_phy *phy;
> + void __iomem *phy_select;
>
> motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL);
> if (!motg) {
> @@ -1553,6 +1554,19 @@ static int msm_otg_probe(struct platform_device *pdev)
> if (IS_ERR(motg->regs))
> return PTR_ERR(motg->regs);
>
> + /*
> + * NOTE: The PHYs can be multiplexed between the chipidea controller
> + * and the dwc3 controller, using a single bit. It is important that
> + * the dwc3 driver does not set this bit in an incompatible way.why would dwc3 access the PHY's address space ? -- balbi
signature.asc
Description: Digital signature
