On 13/05/14 11:04, Ulf Hansson wrote:
On 29 April 2014 10:18, <srinivas.kandaga...@linaro.org> wrote:
From: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Hi Russell,
This patch series adds Qualcomm SD Card Controller support in pl180 mmci
driver. QCom SDCC is basically a pl180, but bit more customized, some of the
register layouts and offsets are different to the ones mentioned in pl180
datasheet. The plan is to totally remove the standalone SDCC driver
drivers/mmc/host/msm_sdcc.* and start using generic mmci driver for all
Qualcomm parts, as we get chance to test on other Qcom boards.
To start using the existing mmci driver, a fake amba id for Qualcomm is added
in patches:
ARM: amba: Add Qualcomm vendor ID.
mmc: mmci: Add Qualcomm Id to amba id table.
Second change is, adding a 3 clock cycle delay for register writes on QCOM
SDCC
registers, which is done in patches:
mmc: mmci: Add register read/write wrappers.
mmc: mmci: Qcomm: Add 3 clock cycle delay after each register write
Third change was to accommodate DATCTRL and MMCICLK register layout changes in
Qcom SDCC. Which is done in patches:
mmc: mmci: Add Qcom datactrl register variant
mmc: mmci: Add Qcom variations to MCICommand register.
mmc: mmci: Qcom fix MCICLK register settings.
mmc: mmci: Add clock support for Qualcomm.
Fourth major change was to add qcom specfic pio read function, the need for
this is because the way MCIFIFOCNT register behaved in QCOM SDCC is very
different to the one in pl180. This change is done in patch:
mmc: mmci: Add Qcom specific pio_read function.
Last some Qcom unrelated changes to support Qcom are done in patches:
mmc: mmci: use NSEC_PER_SEC macro
mmc: mmci: move ST specific register extensions access under condition.
This patches are tested v3.15-rc3 in PIO mode on IFC6410 board with both eMMC
and external SD card. I would appreciate any feedback on the patches.
I would like to get this for v3.16.
Thanks,
srini
Hi Srinivas,
Hi Ulf,
Thanks for working on this patchset, much appreciated! I intend to
review them as soon as I can.
Thats Great.
For your information, currently there are one patch queued via Chris'
mmc tree for mmci and recently I have added my quite extensive
patchset, via mine mmc tree, all to be tested in Linux next.
I suppose the best approach to not hit conflicts would be if you base
your patches upon my tree. Potentially we could merge them this way,
unless of course Russell have other opinions.
git://git.linaro.org/people/ulf.hansson/mmc.git next
Makes sense, I will rebase my next version of patches on top of your mmc
git tree, if Russell has no issues with this approach.
Thanks,
srini
Kind regards
Ulf Hansson
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
