From: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Some of the controller have maximum supported frequency, This patch adds
support in variant data structure to specify such restrictions. This
gives more flexibility in calculating the f_max before passing it to
mmc-core.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
drivers/mmc/host/mmci.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index fd40f9a..202f2d5 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -67,6 +67,7 @@ static unsigned int fmax = 515633;
* @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
* register
* @pwrreg_powerup: power up value for MMCIPOWER register
+ * @f_max: maximum clk frequency supported by the controller.
* @signal_direction: input/out direction of bus signals can be indicated
* @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
* @busy_detect: true if busy detection on dat0 is supported
@@ -87,6 +88,7 @@ struct variant_data {
bool blksz_datactrl16;
bool blksz_datactrl4;
u32 pwrreg_powerup;
+ u32 f_max;
bool signal_direction;
bool pwrreg_clkgate;
bool busy_detect;
@@ -98,6 +100,7 @@ static struct variant_data variant_arm = {
.fifohalfsize = 8 * 4,
.datalength_bits = 16,
.pwrreg_powerup = MCI_PWR_UP,
+ .f_max = 100000000,
};
static struct variant_data variant_arm_extended_fifo = {
@@ -105,6 +108,7 @@ static struct variant_data variant_arm_extended_fifo = {
.fifohalfsize = 64 * 4,
.datalength_bits = 16,
.pwrreg_powerup = MCI_PWR_UP,
+ .f_max = 100000000,
};
static struct variant_data variant_arm_extended_fifo_hwfc = {
@@ -113,6 +117,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc =
{
.clkreg_enable = MCI_ARM_HWFCEN,
.datalength_bits = 16,
.pwrreg_powerup = MCI_PWR_UP,
+ .f_max = 100000000,
};
static struct variant_data variant_u300 = {
@@ -123,6 +128,7 @@ static struct variant_data variant_u300 = {
.datalength_bits = 16,
.sdio = true,
.pwrreg_powerup = MCI_PWR_ON,
+ .f_max = 100000000,
.signal_direction = true,
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
@@ -136,6 +142,7 @@ static struct variant_data variant_nomadik = {
.sdio = true,
.st_clkdiv = true,
.pwrreg_powerup = MCI_PWR_ON,
+ .f_max = 100000000,
.signal_direction = true,
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
@@ -152,6 +159,7 @@ static struct variant_data variant_ux500 = {
.sdio = true,
.st_clkdiv = true,
.pwrreg_powerup = MCI_PWR_ON,
+ .f_max = 100000000,
.signal_direction = true,
.pwrreg_clkgate = true,
.busy_detect = true,
@@ -171,6 +179,7 @@ static struct variant_data variant_ux500v2 = {
.st_clkdiv = true,
.blksz_datactrl16 = true,
.pwrreg_powerup = MCI_PWR_ON,
+ .f_max = 100000000,
.signal_direction = true,
.pwrreg_clkgate = true,
.busy_detect = true,
@@ -189,6 +198,7 @@ static struct variant_data variant_qcom = {
.blksz_datactrl4 = true,
.datalength_bits = 24,
.pwrreg_powerup = MCI_PWR_UP,
+ .f_max = 208000000,
};
static int mmci_card_busy(struct mmc_host *mmc)
@@ -1485,8 +1495,8 @@ static int mmci_probe(struct amba_device *dev,
* so we try to adjust the clock down to this,
* (if possible).
*/
- if (host->mclk > 100000000) {
- ret = clk_set_rate(host->clk, 100000000);
+ if (host->mclk > host->variant->f_max) {
+ ret = clk_set_rate(host->clk, host->variant->f_max);
if (ret < 0)
goto clk_disable;
host->mclk = clk_get_rate(host->clk);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
