This patch seies introduces support for power management in the driver as well
as vendor specific initialization - registers, clocks, voltage regulators etc.
It includes also a rework for the init sequence and other PM pre-requisite such
as write protection support, handling well-known LUN, error handling (retries),
bkops, START_STOP unit command, and ICC levels settings.
--
Changes from V4:
- Restored "[01/16] scsi: support well known logical units" to fix type issue"
and renamed "[01/17] scsi: fixing the "type" for well known LUs"
- Add "[02/17] scsi: sysfs: don't add scsi_device if its already added"
to help addressing Chris comments.
- Squashed "[10/17] scsi: ufs: introduce well known logical unit in ufs" and
"[09/17] scsi: ufs: manually add well known logical" and addressed most of
Chris comments here.
- Cleanup in "[11/16] scsi: ufs: add UFS power management support" to align
it with comments made on previous patches.
Changes from V3:
- Replaced "[01/16] scsi: support well known logical units" with
"[09/17] scsi: ufs: manually add well known logical
- add patch "[PATCH V4 05/17] scsi: ufs: add voting support for host"
- Fix couple of compilation issues introduced in V3
- Add a NULL pointer test to hba->vops before accessing it
- Changed disable/enable irq with request/free irq
Changes from V2:
- Reordered scsi core patches
- add patch "[PATCH V3 02/16] scsi: balance out autopm get/put calls in"
- Minor changes/fixes to the patches:
* "[PATCH V3 10/16] scsi: ufs: add UFS power management support"
* "[PATCH V3 12/16] scsi: ufs: Add support for clock gating"
* "[PATCH V3 16/16] scsi: ufs: definitions for phy interface"
In order to address community concerns, and as a result of further
development and testing.
Changes from V1:
- 6 new patches apended at the end
- Allow overriding power configuration with controller support and
preferences/capabilities <Dolev Raviv>
- Allow overriding power choice with controller capabilities <Dolev Raviv>
- Add support for clock gating and clock scaling <Sahitya Tummala>
- Add capability to control the auto bkops during suspend <Subhash Jadavani>
- Add misc changes for phy/unipro driver usage <Dolev Raviv>
Dolev Raviv (2):
scsi: ufs: refactor configuring power mode
scsi: ufs: definitions for phy interface
Raviv Shvili (1):
scsi: ufs: add voting support for host controller power
Sahitya Tummala (3):
scsi: ufs: Add support for clock gating
scsi: ufs: Add freq-table-hz property for UFS device
scsi: ufs: Add support for clock scaling using devfreq framework
Subhash Jadavani (6):
scsi: fixing the "type" for well known LUs
scsi: sysfs: don't add scsi_device if its already added
scsi: ufs: refactor query descriptor API support
scsi: ufs: manually add well known logical units
scsi: ufs: add UFS power management support
scsi: ufs: tune bkops while power managment events
Sujit Reddy Thumma (4):
scsi: ufs: Allow vendor specific initialization
scsi: ufs: Add regulator enable support
scsi: ufs: Add clock initialization support
scsi: ufs: improve init sequence
Yaniv Gardi (1):
scsi: ufs: Active Power Mode - configuring bActiveICCLevel
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 41 +
drivers/scsi/scsi_scan.c | 8 +
drivers/scsi/scsi_sysfs.c | 3 +
drivers/scsi/ufs/Kconfig | 2 +
drivers/scsi/ufs/ufs.h | 132 +-
drivers/scsi/ufs/ufshcd-pci.c | 55 +-
drivers/scsi/ufs/ufshcd-pltfrm.c | 291 ++-
drivers/scsi/ufs/ufshcd.c | 2519 ++++++++++++++++++--
drivers/scsi/ufs/ufshcd.h | 280 ++-
drivers/scsi/ufs/ufshci.h | 9 +-
drivers/scsi/ufs/unipro.h | 56 +
include/scsi/scsi.h | 1 +
12 files changed, 3095 insertions(+), 302 deletions(-)
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
