On Tue, Sep 2, 2014 at 8:40 AM, Georgi Djakov <gdja...@mm-sol.com> wrote:
> Enable support for the two SD host controllers on the APQ8084 platform
> by adding the required nodes to the DT files.
> On the IFC6540 board, the first controller is connected to the onboard
> eMMC and the second is connected to a micro-SD card slot.
>
> Signed-off-by: Georgi Djakov <gdja...@mm-sol.com>
Hi Georgi,
This looks sane, but...
> ---
> arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 11 +++++++++++
> arch/arm/boot/dts/qcom-apq8084.dtsi | 23 +++++++++++++++++++++++
> 2 files changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
> b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
> index e41cb8a..c9ff108 100644
> --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
> +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
[..]
> + sdhci@f98a4900 {
> + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
> + bus-width = <4>;
...why do you add this node and leave it disabled in the dts?
> + };
> };
> };
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
