On Mon, 10 Nov 2014, Bjorn Andersson wrote: > Some regulators are used to power e.g. PLLs that clocks the core we're > running on, so we can't turn them off directly; but we do want them off > when the core is powered down. To handle this the Qualcomm SoC provides > a means to specify a "sleep state" for RPM resources that can be > triggered by the hardware when the cores are brought down. > > Resources of this type should be considered always-on while the CPU(s) > are running and we can utilize the "sleep state" functionality to defer > disabling them until the CPU(s) go to sleep, if not used by other > peripherals at that time. > > Other properties are kept in sync between the states, so that if the > CPU(s) go to sleep with a particular regulator still enabled there will > be no change. > > Signed-off-by: Bjorn Andersson <[email protected]> > --- > Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 28 ++++++++
Please place this into a seperate patch. See: Documentation/devicetree/bindings/submitting-patches.txt > drivers/regulator/qcom_rpm-regulator.c | 68 > +++++++++++++++----- > 2 files changed, 79 insertions(+), 17 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > index 4264021..4671eef 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > @@ -112,6 +112,13 @@ of valid subnodes that can operate on these resources. > Definition: select that the power supply should operate in hysteretic > mode, instead of the default pwm mode > > +- qcom,rpm-assisted-disable: > + Usage: optional > + Value type: <empty> > + Definition: select that the regulator is supplying the active CPU(s) > + and can only be disabled with the assistans from the RPM > + after going to sleep > + This requires a DT Ack. > Standard regulator bindings are used inside switch mode power supply > subnodes. > Check Documentation/devicetree/bindings/regulator/regulator.txt for more > details. > @@ -160,6 +167,13 @@ details. > qcom,rpm-pm8921-nldo, > qcom,rpm-pm8921-nldo1200 > > +- qcom,rpm-assisted-disable: > + Usage: optional > + Value type: <empty> > + Definition: select that the regulator is supplying the active CPU(s) > + and can only be disabled with the assistans from the RPM > + after going to sleep > + Eh? I think I'm seeing double. > Standard regulator bindings are used inside switch low-dropout regulator > subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt > for > more details. > @@ -190,6 +204,13 @@ more details. > 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, > 1480000, 1370000, 1280000, 1200000 > > +- qcom,rpm-assisted-disable: > + Usage: optional > + Value type: <empty> > + Definition: select that the regulator is supplying the active CPU(s) > + and can only be disabled with the assistans from the RPM > + after going to sleep > + Triple? > Standard regulator bindings are used inside negative charge pump regulator > subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt > for > more details. > @@ -215,6 +236,13 @@ more details. > QCOM_RPM_PM8921_LVS1 - QCOM_RPM_PM8921_LVS7, > QCOM_RPM_PM8921_MVS > > +- qcom,rpm-assisted-disable: > + Usage: optional > + Value type: <empty> > + Definition: select that the regulator is supplying the active CPU(s) > + and can only be disabled with the assistans from the RPM > + after going to sleep > + There must be a better way to document this. > = EXAMPLE > > #include <dt-bindings/mfd/qcom-rpm.h> [...] -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
