Add ARM common idle states device bindings for cpuidle support for APQ 8084.
Support standby and standalone power collapse (power down that does not affect any SoC idle states) for each cpu. Cc: Kumar Gala <[email protected]> Signed-off-by: Lina Iyer <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> --- arch/arm/boot/dts/qcom-apq8084.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 71182bf..a3c24ff 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -22,6 +22,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; cpu@1 { @@ -32,6 +33,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; cpu@2 { @@ -42,6 +44,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; cpu@3 { @@ -52,6 +55,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; L2: l2-cache { @@ -59,6 +63,24 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_STBY: standby { + compatible = "qcom,idle-state-stby", + "arm,idle-state"; + entry-latency-us = <1>; + exit-latency-us = <1>; + min-residency-us = <2>; + }; + + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu { -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
