Enable the NAND controller node on the AP148 platform. Provide pinmux
information.

Cc: devicet...@vger.kernel.org
Signed-off-by: Archit Taneja <arch...@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts 
b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 7f9ea50..03fd6b7 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -30,6 +30,28 @@
                                        bias-none;
                                };
                        };
+                       nand_pins: nand_pins {
+                               mux {
+                                       pins = "gpio34", "gpio35", "gpio36",
+                                              "gpio37", "gpio38", "gpio39",
+                                              "gpio40", "gpio41", "gpio42",
+                                              "gpio43", "gpio44", "gpio45",
+                                              "gpio46", "gpio47";
+                                       function = "nand";
+                                       drive-strength = <10>;
+                                       bias-disable;
+                               };
+                               pullups {
+                                       pins = "gpio39";
+                                       bias-pull-up;
+                               };
+                               hold {
+                                       pins = "gpio40", "gpio41", "gpio42",
+                                              "gpio43", "gpio44", "gpio45",
+                                              "gpio46", "gpio47";
+                                       bias-bus-hold;
+                               };
+                       };
                };
 
                gsbi@16300000 {
@@ -93,5 +115,19 @@
                sata@29000000 {
                        status = "ok";
                };
+
+               nand@0x1ac00000 {
+                       status = "ok";
+
+                       pinctrl-0 = <&nand_pins>;
+                       pinctrl-names = "default";
+
+                       nand-ecc-strength = <4>;
+                       nand-bus-width = <8>;
+               };
        };
 };
+
+&adm_dma {
+       status = "ok";
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to