This is one of several different panels that are used on the Sony Xperia
Z3 phone. It can operate in either command or video mode, although so
far only video mode is implemented (since that is the mode that the
downstream kernel version I happened to be looking at was using, and
that is where I got the programming sequences for the panel).
Signed-off-by: Rob Clark <robdcl...@gmail.com>
---
Couple Notes:
1) programming sequences and basically everything I know about the
panel came from downstream android kernel. I've started a wiki
page to document how to translate from downstream kernel-msm way
of doing things to upstream panel framework, which may be useful
for others wanting to port downstream panel drivers for snapdragon
devices:
https://github.com/freedreno/freedreno/wiki/DSI-Panel-Driver-Porting
2) The Sony phones at least (not sure if this is common) use one of
several different panels, with runtime probing. Depending on the
device they seem to either use a gpio (simple) or send some DSI
commands to read back the panel-id. My rough thinking here about
how to handle this is to implement a "panel-meta" driver (or maybe
one each for the different probing methods), which would take a
list of phandles to the actual candidate panels, and fwd the panel
fxn calls to the chosen panel after probing.
.../bindings/panel/auo,novatek-1080p.txt | 25 ++
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-auo-novatek-1080p.c | 470 +++++++++++++++++++++
4 files changed, 505 insertions(+)
create mode 100644
Documentation/devicetree/bindings/panel/auo,novatek-1080p.txt
create mode 100644 drivers/gpu/drm/panel/panel-auo-novatek-1080p.c
diff --git a/Documentation/devicetree/bindings/panel/auo,novatek-1080p.txt
b/Documentation/devicetree/bindings/panel/auo,novatek-1080p.txt
new file mode 100644
index 0000000..8a53093
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/auo,novatek-1080p.txt
@@ -0,0 +1,25 @@
+AU Optronics Corporation 1080x1920 DSI panel
+
+This panel supports both video and command mode (although currently only video
+mode is implemented in the driver.
+
+Required properties:
+- compatible: should be "auo,novatek-1080p-vid"
+
+Optional properties:
+- power-supply: phandle of the regulator that provides the supply voltage
+- reset-gpio: phandle of gpio for reset line
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ dsi@54300000 {
+ panel: panel@0 {
+ compatible = "auo,novatek-1080p-vid";
+ reg = <0>;
+
+ power-supply = <...>;
+ reset-gpio = <...>;
+ backlight = <...>;
+ };
+ };
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 6d64c7b..89f0e8c 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -43,4 +43,13 @@ config DRM_PANEL_SHARP_LQ101R1SX01
To compile this driver as a module, choose M here: the module
will be called panel-sharp-lq101r1sx01.
+config DRM_PANEL_AUO_NOVATEK_1080P
+ tristate "AUO Novatek 1080p video mode panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for AUO 1080p DSI panel
+ as found in some Sony XPERIA Z3 devices
+
endmenu
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 4b2a043..cbcfedf 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
+obj-$(CONFIG_DRM_PANEL_AUO_NOVATEK_1080P) += panel-auo-novatek-1080p.o
diff --git a/drivers/gpu/drm/panel/panel-auo-novatek-1080p.c
b/drivers/gpu/drm/panel/panel-auo-novatek-1080p.c
new file mode 100644
index 0000000..0db70dd
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-auo-novatek-1080p.c
@@ -0,0 +1,470 @@
+/*
+ * Copyright (C) 2015 Red Hat
+ * Author: Rob Clark <robdcl...@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+struct auo_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *dsi;
+
+ struct backlight_device *backlight;
+ struct regulator *supply;
+ struct gpio_desc *reset_gpio;
+
+ bool prepared;
+ bool enabled;
+
+ const struct drm_display_mode *mode;
+};
+
+static inline struct auo_panel *to_auo_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct auo_panel, base);
+}
+
+static int auo_panel_init(struct auo_panel *auo)
+{
+ struct mipi_dsi_device *dsi = auo->dsi;
+ int ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_generic_write(dsi, (u8[]){ 0xb0, 0x04 }, 2);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xff, (u8[]){ 0xe0 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xfb, (u8[]){ 0x01 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xb5, (u8[]){ 0x86 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xb6, (u8[]){ 0x77 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xb8, (u8[]){ 0xad }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xff, (u8[]){ 0x20 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xfb, (u8[]){ 0x01 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xff, (u8[]){ 0x24 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xfb, (u8[]){ 0x01 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xc6, (u8[]){ 0x00 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xc5, (u8[]){ 0x32 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0x92, (u8[]){ 0x92 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xff, (u8[]){ 0x10 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_SCANLINE,
+ (u8[]){ 0x03, 0x00 }, 2);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0x3b, (u8[]){ 0x03, 0x30, 0x06 }, 3);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xbb, (u8[]){ 0x10 }, 1);
+ if (ret < 0)
+ return ret;
+ msleep(1);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0)
+ return ret;
+ msleep(30);
+
+ return 0;
+}
+
+static int auo_panel_on(struct auo_panel *auo)
+{
+ struct mipi_dsi_device *dsi = auo->dsi;
+ int ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0)
+ return ret;
+
+ msleep(40);
+
+ return 0;
+}
+
+static int auo_panel_off(struct auo_panel *auo)
+{
+ struct mipi_dsi_device *dsi = auo->dsi;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_write(dsi, 0xff, (u8[]){ 0x10 }, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0)
+ return ret;
+
+ msleep(100);
+
+ return 0;
+}
+
+static int auo_panel_disable(struct drm_panel *panel)
+{
+ struct auo_panel *auo = to_auo_panel(panel);
+
+ if (!auo->enabled)
+ return 0;
+
+ DRM_DEBUG("disable\n");
+
+ if (auo->backlight) {
+ auo->backlight->props.power = FB_BLANK_POWERDOWN;
+ backlight_update_status(auo->backlight);
+ }
+
+ auo->enabled = false;
+
+ return 0;
+}
+
+static int auo_panel_unprepare(struct drm_panel *panel)
+{
+ struct auo_panel *auo = to_auo_panel(panel);
+ int ret;
+
+ if (!auo->prepared)
+ return 0;
+
+ DRM_DEBUG("unprepare\n");
+
+ ret = auo_panel_off(auo);
+ if (ret) {
+ dev_err(panel->dev, "failed to set panel off: %d\n", ret);
+ return ret;
+ }
+
+ regulator_disable(auo->supply);
+ if (auo->reset_gpio)
+ gpiod_set_value(auo->reset_gpio, 0);
+
+ auo->prepared = false;
+
+ return 0;
+}
+
+static int auo_panel_prepare(struct drm_panel *panel)
+{
+ struct auo_panel *auo = to_auo_panel(panel);
+ int ret;
+
+ if (auo->prepared)
+ return 0;
+
+ DRM_DEBUG("prepare\n");
+
+ if (auo->reset_gpio) {
+ gpiod_set_value(auo->reset_gpio, 0);
+ msleep(5);
+ }
+
+ ret = regulator_enable(auo->supply);
+ if (ret < 0)
+ return ret;
+
+ msleep(20);
+
+ if (auo->reset_gpio) {
+ gpiod_set_value(auo->reset_gpio, 1);
+ msleep(10);
+ }
+
+ msleep(150);
+
+ ret = auo_panel_init(auo);
+ if (ret) {
+ dev_err(panel->dev, "failed to init panel: %d\n", ret);
+ goto poweroff;
+ }
+
+ ret = auo_panel_on(auo);
+ if (ret) {
+ dev_err(panel->dev, "failed to set panel on: %d\n", ret);
+ goto poweroff;
+ }
+
+ auo->prepared = true;
+
+ return 0;
+
+poweroff:
+ regulator_disable(auo->supply);
+ if (auo->reset_gpio)
+ gpiod_set_value(auo->reset_gpio, 0);
+ return ret;
+}
+
+static int auo_panel_enable(struct drm_panel *panel)
+{
+ struct auo_panel *auo = to_auo_panel(panel);
+
+ if (auo->enabled)
+ return 0;
+
+ DRM_DEBUG("enable\n");
+
+ if (auo->backlight) {
+ auo->backlight->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(auo->backlight);
+ }
+
+ auo->enabled = true;
+
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .clock = 149506,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 56,
+ .hsync_end = 1080 + 56 + 8,
+ .htotal = 1080 + 56 + 8 + 8,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 233,
+ .vsync_end = 1920 + 233 + 2,
+ .vtotal = 1920 + 233 + 2 + 8,
+ .vrefresh = 60,
+};
+
+static int auo_panel_get_modes(struct drm_panel *panel)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, &default_mode);
+ if (!mode) {
+ dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ default_mode.vrefresh);
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ drm_mode_probed_add(panel->connector, mode);
+
+ panel->connector->display_info.width_mm = 64;
+ panel->connector->display_info.height_mm = 114;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs auo_panel_funcs = {
+ .disable = auo_panel_disable,
+ .unprepare = auo_panel_unprepare,
+ .prepare = auo_panel_prepare,
+ .enable = auo_panel_enable,
+ .get_modes = auo_panel_get_modes,
+};
+
+static const struct of_device_id auo_of_match[] = {
+ { .compatible = "auo,novatek-1080p-vid", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, auo_of_match);
+
+static int auo_panel_add(struct auo_panel *auo)
+{
+ struct device *dev= &auo->dsi->dev;
+ struct device_node *np;
+ int ret;
+
+ auo->mode = &default_mode;
+
+ auo->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(auo->supply))
+ return PTR_ERR(auo->supply);
+
+ auo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(auo->reset_gpio)) {
+ dev_err(dev, "cannot get reset-gpios %ld\n",
+ PTR_ERR(auo->reset_gpio));
+ auo->reset_gpio = NULL;
+ } else {
+ gpiod_direction_output(auo->reset_gpio, 0);
+ }
+
+ np = of_parse_phandle(dev->of_node, "backlight", 0);
+ if (np) {
+ auo->backlight = of_find_backlight_by_node(np);
+ of_node_put(np);
+
+ if (!auo->backlight)
+ return -EPROBE_DEFER;
+ }
+
+ drm_panel_init(&auo->base);
+ auo->base.funcs = &auo_panel_funcs;
+ auo->base.dev = &auo->dsi->dev;
+
+ ret = drm_panel_add(&auo->base);
+ if (ret < 0)
+ goto put_backlight;
+
+ return 0;
+
+ put_backlight:
+ if (auo->backlight)
+ put_device(&auo->backlight->dev);
+
+ return ret;
+}
+
+static void auo_panel_del(struct auo_panel *auo)
+{
+ if (auo->base.dev)
+ drm_panel_remove(&auo->base);
+
+ if (auo->backlight)
+ put_device(&auo->backlight->dev);
+}
+
+static int auo_panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct auo_panel *auo;
+ int ret;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_HSE |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS |
+ MIPI_DSI_MODE_EOT_PACKET;
+
+ auo = devm_kzalloc(&dsi->dev, sizeof(*auo), GFP_KERNEL);
+ if (!auo) {
+ return -ENOMEM;
+ }
+
+ mipi_dsi_set_drvdata(dsi, auo);
+
+ auo->dsi = dsi;
+
+ ret = auo_panel_add(auo);
+ if (ret < 0) {
+ return ret;
+ }
+
+ return mipi_dsi_attach(dsi);
+}
+
+static int auo_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct auo_panel *auo = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = auo_panel_disable(&auo->base);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_detach(&auo->base);
+ auo_panel_del(auo);
+
+ return 0;
+}
+
+static void auo_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct auo_panel *auo = mipi_dsi_get_drvdata(dsi);
+
+ auo_panel_disable(&auo->base);
+}
+
+static struct mipi_dsi_driver auo_panel_driver = {
+ .driver = {
+ .name = "panel-auo-novatek-1080p",
+ .of_match_table = auo_of_match,
+ },
+ .probe = auo_panel_probe,
+ .remove = auo_panel_remove,
+ .shutdown = auo_panel_shutdown,
+};
+module_mipi_dsi_driver(auo_panel_driver);
+
+MODULE_AUTHOR("Rob Clark <robdcl...@gmail.com>");
+MODULE_DESCRIPTION("AUO Novatek 1080p panel driver");
+MODULE_LICENSE("GPL v2");
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
