This introduces initial support for the Sony Xperia Z smartphone, including support for UART, MMC, USB gadget and physical buttons.
Signed-off-by: Bjorn Andersson <bjorn.anders...@sonymobile.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 436 +++++++++++++++++++++
2 files changed, 437 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7d3e495c0897..42a9370d4ad1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -500,6 +500,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
+ qcom-apq8064-sony-xperia-yuga.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
new file mode 100644
index 000000000000..06b3c76c3e41
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -0,0 +1,436 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Sony Xperia Z";
+ compatible = "sony,xperia-yuga", "qcom,apq8064";
+
+ aliases {
+ serial0 = &gsbi5_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ soc {
+ pinctrl@800000 {
+ gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+ rx {
+ pins = "gpio52";
+ function = "gsbi5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio51";
+ function = "gsbi5";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ sdcc1_pin_a: sdcc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strengh = <16>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc1_data";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_pin_a: sdcc3-pin-active {
+ clk {
+ pins = "sdc3_clk";
+ drive-strengh = <8>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc3_cmd";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc3_data";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+ pins = "gpio26";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+
+ rpm@108000 {
+ regulators {
+ vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vin_lvs_1_3_6-supply = <&pm8921_s4>;
+ vin_lvs_4_5_7-supply = <&pm8921_s4>;
+ vin_ncp-supply = <&pm8921_l6>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_l24-supply = <&pm8921_s1>;
+ vin_l25-supply = <&pm8921_s1>;
+ vin_l27-supply = <&pm8921_s7>;
+ vin_l28-supply = <&pm8921_s7>;
+
+ /* Buck SMPS */
+ s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode =
<QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ s8 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+
+ /* PMOS LDO */
+ l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ bias-pull-down;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ bias-pull-down;
+ };
+
+ l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ bias-pull-down;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ bias-pull-down;
+ };
+
+ l11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ bias-pull-down;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ bias-pull-down;
+ };
+
+ l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l21 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ l22 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+ bias-pull-down;
+ };
+
+ l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ bias-pull-down;
+ };
+
+ l27 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ l28 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ l29 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ lvs1 {
+ bias-pull-down;
+ };
+
+ lvs2 {
+ bias-pull-down;
+ };
+
+ lvs3 {
+ bias-pull-down;
+ };
+
+ lvs4 {
+ bias-pull-down;
+ };
+
+ lvs5 {
+ bias-pull-down;
+ };
+
+ lvs6 {
+ bias-pull-down;
+ };
+
+ lvs7 {
+ bias-pull-down;
+ };
+
+ usb-switch {};
+
+ hdmi-switch {};
+
+ ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+ };
+
+ qcom,ssbi@500000 {
+ pmic@0 {
+ gpio@150 {
+ gpio_keys_pin_a: gpio-keys-pin-active {
+ pins = "gpio3", "gpio4",
"gpio29", "gpio35";
+ function = "normal";
+
+ bias-pull-up;
+ drive-push-pull;
+ input-enable;
+ power-source = <2>;
+ qcom,drive-strength =
<PMIC_GPIO_STRENGTH_NO>;
+ qcom,pull-up-strength = <0>;
+ };
+ };
+ };
+ };
+
+ phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ gadget@12500000 {
+ status = "okay";
+ };
+
+ gsbi@1a200000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+
+ serial@1a240000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi5_uart_pin_a>;
+ };
+ };
+
+ amba {
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc1_pin_a>;
+ };
+
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+
+ vmmc-supply = <&pm8921_l6>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
+ };
+ };
+ };
+};
--
2.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
