The SAW2 (Subsystem Power Manager and Adaptive Voltage Scaling Wrapper)
is part of the SPM subsystem. It is a hardware block found on some of the
Qualcomm chipsets, which regulates the power to the CPU cores. Add some
basic support for it, so that we can do dynamic voltage scaling.
Signed-off-by: Georgi Djakov <georgi.dja...@linaro.org>
---
drivers/soc/qcom/spm.c | 149 +++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 148 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index b04b05a0904e..03fcee4b85d9 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -20,11 +20,14 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/qcom_scm.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
@@ -51,6 +54,8 @@ enum spm_reg {
SPM_REG_PMIC_DLY,
SPM_REG_PMIC_DATA_0,
SPM_REG_PMIC_DATA_1,
+ SPM_REG_RST,
+ SPM_REG_STS_1,
SPM_REG_VCTL,
SPM_REG_SEQ_ENTRY,
SPM_REG_SPM_STS,
@@ -68,9 +73,22 @@ struct spm_reg_data {
u8 start_index[PM_SLEEP_MODE_NR];
};
+struct spm_vlevel_data {
+ struct spm_driver_data *drv;
+ unsigned selector;
+};
+
+struct saw2_vreg {
+ struct regulator_desc rdesc;
+ struct regulator_dev *rdev;
+ struct spm_driver_data *drv;
+ u32 selector;
+};
+
struct spm_driver_data {
void __iomem *reg_base;
const struct spm_reg_data *reg_data;
+ struct saw2_vreg *vreg;
};
static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
@@ -94,10 +112,13 @@ static const struct spm_reg_data spm_reg_8974_8084_cpu = {
static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
[SPM_REG_CFG] = 0x08,
+ [SPM_REG_STS_1] = 0x10,
+ [SPM_REG_VCTL] = 0x14,
[SPM_REG_SPM_CTL] = 0x20,
[SPM_REG_PMIC_DLY] = 0x24,
[SPM_REG_PMIC_DATA_0] = 0x28,
[SPM_REG_PMIC_DATA_1] = 0x2C,
+ [SPM_REG_RST] = 0x30,
[SPM_REG_SEQ_ENTRY] = 0x80,
};
@@ -282,6 +303,127 @@ static struct cpuidle_ops qcom_cpuidle_ops __initdata = {
CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops);
CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops);
+static int saw2_regulator_get_voltage(struct regulator_dev *rdev)
+{
+ struct spm_driver_data *drv = rdev_get_drvdata(rdev);
+
+ return regulator_list_voltage_linear_range(rdev, drv->vreg->selector);
+}
+
+static void spm_smp_set_vdd(void *data)
+{
+ struct spm_vlevel_data *vdata = (struct spm_vlevel_data *)data;
+ struct spm_driver_data *drv = vdata->drv;
+ struct saw2_vreg *vreg = drv->vreg;
+ u32 sel = vdata->selector;
+ u32 val, new_val;
+ u32 vctl, data0, data1;
+ int timeout_us = 50;
+
+ if (vreg->selector == sel)
+ return;
+
+ vctl = spm_register_read(drv, SPM_REG_VCTL);
+ data0 = spm_register_read(drv, SPM_REG_PMIC_DATA_0);
+ data1 = spm_register_read(drv, SPM_REG_PMIC_DATA_1);
+
+ /* select the band */
+ val = 0x80 | sel;
+
+ vctl &= ~0xff;
+ vctl |= val;
+
+ data0 &= ~0xff;
+ data0 |= val;
+
+ data1 &= ~0x3f;
+ data1 |= val & 0x3f;
+ data1 &= ~0x3f0000;
+ data1 |= (val & 0x3f) << 16;
+
+ spm_register_write(drv, SPM_REG_RST, 1);
+ spm_register_write(drv, SPM_REG_VCTL, vctl);
+ spm_register_write(drv, SPM_REG_PMIC_DATA_0, data0);
+ spm_register_write(drv, SPM_REG_PMIC_DATA_1, data1);
+
+ do {
+ new_val = spm_register_read(drv, SPM_REG_STS_1) & 0xff;
+ if (new_val == val)
+ break;
+ udelay(1);
+ } while (--timeout_us);
+
+ if (!timeout_us) {
+ pr_err("%s: Voltage not changed: %#x\n", __func__, new_val);
+ return;
+ }
+
+ if (sel > vreg->selector) {
+ /* PMIC internal slew rate is 1250 uV per us */
+ udelay((sel - vreg->selector) * 10);
+ }
+
+ vreg->selector = sel;
+}
+
+static int saw2_regulator_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct spm_driver_data *drv = rdev_get_drvdata(rdev);
+ struct spm_vlevel_data data;
+ int cpu = rdev_get_id(rdev);
+
+ data.drv = drv;
+ data.selector = selector;
+
+ return smp_call_function_single(cpu, spm_smp_set_vdd, &data, true);
+}
+
+static struct regulator_ops saw2_regulator_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = saw2_regulator_set_voltage_sel,
+ .get_voltage = saw2_regulator_get_voltage,
+};
+
+static struct regulator_desc saw2_regulator = {
+ .owner = THIS_MODULE,
+ .type = REGULATOR_VOLTAGE,
+ .ops = &saw2_regulator_ops,
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(700000, 0, 56, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 57,
+};
+
+static int register_saw2_regulator(struct spm_driver_data *drv,
+ struct platform_device *pdev, int cpu)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct saw2_vreg *vreg;
+ struct regulator_config config = { };
+
+ vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg)
+ return -ENOMEM;
+
+ drv->vreg = vreg;
+ config.driver_data = drv;
+ config.dev = &pdev->dev;
+ config.of_node = np;
+
+ vreg->rdesc = saw2_regulator;
+ vreg->rdesc.id = cpu;
+ vreg->rdesc.name = of_get_property(np, "regulator-name", NULL);
+ config.init_data = of_get_regulator_init_data(&pdev->dev,
+ pdev->dev.of_node,
+ &vreg->rdesc);
+
+ vreg->rdev = devm_regulator_register(&pdev->dev, &vreg->rdesc, &config);
+
+ return PTR_ERR_OR_ZERO(vreg->rdev);
+}
+
static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,
int *spm_cpu)
{
@@ -327,7 +469,7 @@ static int spm_dev_probe(struct platform_device *pdev)
struct resource *res;
const struct of_device_id *match_id;
void __iomem *addr;
- int cpu;
+ int cpu, ret;
drv = spm_get_drv(pdev, &cpu);
if (!drv)
@@ -368,6 +510,11 @@ static int spm_dev_probe(struct platform_device *pdev)
per_cpu(cpu_spm_drv, cpu) = drv;
+ ret = register_saw2_regulator(drv, pdev, cpu);
+ if (ret)
+ dev_err(&pdev->dev, "error registering SAW2 regulator: %d\n",
+ ret);
+
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
