Hi all
I was trying to get the sound working for my assabet+neponset board.
Whenever I try "dd if=/dev/dsp of=/dev/dsp bs=8192", it produces a
hissing noise.
When I try to play a wav file using the splay utility, it again produces
a hissing noise, but what is interesting is that it produces some sound
at the very end. I am not able to figure out why this is happening.
Could someone tell me how to go about debugging this?
If I try "cat /dev/sndstat" I get
/dev/sndstat: no such device.
According to the Sound-HOWTO, this must give the specs of the card, and
such an error message means that the driver is not loaded. What I am
confused abt is how does it produce a hissing noise without the driver
being loaded? and why does it play the last bit ?
I have set the following options in the linux/arch/arm/defconfigs file
CONFIG_SOUND=y
CONFIG_SOUND_UDMA1341=y
All others are not set.
(Should I set CONFIG_OSS_SOUND? Setting this did not help.)
It is the same in linux/arch/arm/def-configs/assabet and neponest files.
Im not sure if there are any other places where I should change the
options.
I looked through the archives of the list and a couple of others faced
the same problem. But it was not mentioned what they did to correct the
problem.
Any help would be appreciated.
Thanks in Advance
Regards,
KAR.
Graduate Research Assistant
Dept of EE - Systems
University of Southern California
Los Angeles
CA - 90089.
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
