Russell King - ARM Linux <[EMAIL PROTECTED]> writes:
> Ralph Siemsen writes:
> > I can't belive the PCI bus is to blame seeing as how the system manages
> > to run this far - i'm not sure what to look for on the PCI bus, we have
> > an analyser, but it's like a needle in the haystack if you don't have
> > something to go on.
> "needle in a haystack" is exactly where we are at the present time. We
> have virtually zero information on whats going on, and we need to increase
> our information if we're going to figure it out.
I don't know if this is at all related, but here goes:
I'm getting this message every now and then:
PCI: parity error detected:
I'm running an old Corel NetWinder with Linux 2.4.0-test9-rmk1. This
is what /proc/cpuinfo says:
Processor : Intel StrongARM-110 rev 3 (v4l)
BogoMIPS : 262.14
Hardware : Rebel-NetWinder
Revision : 52ff
Serial : 0000000000000776
This started a few days ago, when the machine had been running with an
uptime of about four weeks. The message appears, say, a few times per
hour and seems to be correlated to disk activity. I never saw it before.
--
http://lars.nocrew.org/
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
