>
> I've configured the kernel with the option CONFIG_ANGELBOOT and
That should be correct..
> If i try to download the images with the angelboot nothing happen.
What you mean by nothing happen!! Is that mean you dont see anything on
the vga. IF so try enabling serial console option ( disable vga) and see
if you can get somthing.
>Sometimes the angel crash, or reset.
Angel crashes?!! The reset thing happens if your entry is not correct.
There can be other reasons also. ( downloading once again works sometimes)
>
> I load and start the image at 0x8000, with r1 loaded to 14 (CLPS7500).
What is your options file.
The one that works is here..
base 0x008000
entry 0x008000
device /dev/ttyS0
options "9600 8N1"
baud 115200
#otherfile rootfs.gz
#otherbase 0x800000
exec minicom
Regards,
_Saran_
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
