Dear all,
I try my best to find the cygmon version2.0D,but I cat't find it.
I only find the cygmon version2.0,but it not support the IQ80310.
Do you know where to get the cygmon version2.0D that support IQ80310.
Please tell me.
Thank you very much.
Best Regards
wei-ting Lai
----- Original Message -----
From: Nicolas Pitre <[EMAIL PROTECTED]>
To: weitin_lai <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, April 13, 2001 12:06 PM
Subject: Re: PROBLEM ON REDBOOT OF IQ80310 !!
>
>
> On Fri, 13 Apr 2001, weitin_lai wrote:
>
> > Thank for your help,I will report the result that I try it ASAP.
> > If there is any other method to sovle it, please tell me.
> > Thank you very much.
> >
> > Best Regards
> >
> > wei-ting Lai
> >
> > On Fri, Apr 13, 2001 at 12:27:46AM +0800, weitin_lai wrote:
> > > I have a IQ80310 board, redboot debug kits.
>
> I've never been able to make Linux boot with any version of Redboot so
far.
> Redboot and/or the hardware seem to have bugs making that combination
> unreliable.
>
> Your best bet is to download the FRU utility for that board from Intel's
> site and flash Cygmon instead. Then you should be able to follow the
> instructions in the kickstart kit or the patch release notes, and enjoy
> limited functionalities.
>
> Also note that boards prior to revision F contain design mistakes that
> prevent Linux from reliably make use of any PCI devices except for the
> on-board ethernet. Intel is supposed to make available new boards (rev F)
> in the near future with that problem solved.
>
>
> Nicolas
>
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
