On Tue, Jun 12, 2001 at 02:57:37PM -0700, Sisinio Baldis wrote:
> I just received a LART board and have successfully gotten the kernel and
> ramdisk running on the dev board. :-) I need a way to transfer files from
> my PC (I have currently been changing my ramdisk and uploading it again ...
> which is not fun).
Well, Z-modem is the easiest way to transfer files.
> What is the most common way to establish a ppp
> connection with these embedded boards over the serial port? Can someone
> point me to a link, program(s), etc that I could use.
For ppp I use this on the desktop:
echo 1 > /proc/sys/net/ipv4/ip_forward
pppd /dev/ttyS0 115200 noauth lock proxyarp LOCAL_IP:LART_IP nocrtscts local bsdcomp
15,15
And this on the LART:
pppd /dev/ttyS1 115200 noauth lock LART_IP:LOCAL_IP nocrtscts local bsdcomp 15,15
defaultroute
Be sure that you don't have a getty on /dev/ttyS1. Also note that you
now need some networking clients or daemons on the LART (that's why I
prefer Z-modem on a LART).
Erik
--
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands
Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED]
WWW: http://www-ict.its.tudelft.nl/~erik/
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
