On Thu, Sep 13, 2001 at 10:35:30AM +0200, Fromm, Thilo wrote:
> > > card coming along with the assabet board. It works fine on the neponset
> > > but seems to be ignored on the assabet. SA1100 PCMCIA CardBus support is
> in
> > > the kernel as well as PCMCIA NE2000 (pcnet_cs). Still no eth0 for me.
> > > What do I miss? BTW: kernel is 2.4.8-ac12-rmk1-np2.
>
> > What does cardctl status and cardctl ident report? Any messages in
> > any of the system logs?
> cardctl reports an empty socket 0 and a 3.3V 16bit PC-card function0:[ready]
> in socket 1. The card is recognised correctly as CF+ LPE [...],
> manufacturer-ID 0x0104, 0x0075, function is 6 (network), still no eth0. I
> think now that I miss a certain step to bring this thing up, anyway, can't
> access it via ifconfig.
Ok, those are the correct IDs. Can you check that you have the following
entry in your /etc/pcmcia/config file please?
card "Socket LP-E CF+ Ethernet"
manfid 0x0104, 0x0075
bind "pcnet_cs"
This tells the PCMCIA card manager that your card needs the pcnet_cs driver.
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
