On Thu, Jan 10, 2002 at 06:53:01AM -0000, N M Gururaja wrote: > We are working on a board, which is similar to Assabet board.
That doesn't give any information. All SA1110 boards are "similar to Assabet" simply because all SA1110 boards use an SA1110 CPU. > It has a Toshiba 240X320 TFT LCD display. We are using > drivers/video/sa1100fb.c driver. When either kernel or the boot > loader enables LCD controller, some times we observe distortion in > the LCD display. This distortion stays for few seconds and no > distortion is observed after that. Sometimes the distortion is so > much that we can not make out the messages that are being printed by > the POST. Did anyone face the same problem? Any pointers and guidance > to solve this problem will be very much appreciated. Can be either incorrect LCD timings or a problem in the LCD power supply (or the backlight power supply). Erik -- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED] WWW: http://www-ict.its.tudelft.nl/~erik/ _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm Please visit the above address for information on this list.
