Hi,
We have a board which is Intel Strong Arm based , it's a SA1110 CPU with
revision B4. Blob works absolutely fine on this board and we have verified
the same by adding diag and blob-chain onto it.
We are using kernel 2.4.16 with patch-2.4.16-rmk2. We were able to see the
flow of the init kernel through print statements and our board reaches till
init/main.c after which it stalls.
What we were doubting was that probably the CPU goes into some exception
state and simply stalls or may be the compiler we are using might not be
supporting this revision of the CPU i.e. B4 or may be there might be some
driver issue.
Let me also clarify that we are using a cross-compiler based on
binutils-2.11.2 and gcc-2.95.3.
So has anybody worked on B4 revision of the SA1110 processor and help me out
on this.
Thanks in advance
Regds...aradhana
Disclaimer
Information contained in this E-MAIL being proprietary to
Wipro Limited is 'privileged' and 'confidential' and intended for use only
by the individual or entity to which it is addressed. You are notified that
any use, copying or dissemination of the information contained in the E-MAIL
in any manner whatsoever is strictly prohibited.
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
http://www.arm.linux.org.uk/armlinux/mailinglists.php
Please visit the above addresses for information on this list.
