>From Alessandro Carniel
[EMAIL PROTECTED]
www.carniel.it
Rupinpiccolo 38
Sgonico
34100 Trieste
Italy
Hi i have compiled kernel 2.4.17 rmk5 and the ram disk don't boot
Devices ttySA0 is OK
the same ramdisk work with kernel 2.4.7-rmk1 ... any idea ???
I have include the log of the boot from on the same machine ALN whit the two version .
Starting kernel ...
Uncompressing Linux.................................. done, booting the kernel.
Linux version 2.4.17-rmk5 (root@tocai) (gcc version 2.95.2 19991024 (release)) #3 Mon
Feb 18 15:33:0
3 CET 2002
Processor: Intel StrongARM-1110 revision 8
Architecture: LART
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram
Warning: uninitialized Real Time Clock
Calibrating delay loop... 127.38 BogoMIPS
Memory: 16MB 16MB = 32MB total
Memory: 28024KB available (863K code, 207K data, 44K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock: 191.700 MHz (0.000-191.700 MHz)
Starting kswapd
ttySA0 at MEM 0x80050000 (irq = 17) is a SA1100
ttySA1 at MEM 0x80010000 (irq = 15) is a SA1100
ttySA2 at MEM 0x80030000 (irq = 16) is a SA1100
pty: 256 Unix98 ptys configured
SA1100 Real Time Clock driver v1.00
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 8388608K size 1024 blocksize ------->
****** Why ? *****
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
crc errorFreeing initrd memory: 3072K ---------------> ********** Why ? ************
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 44K
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.
****************************** don't work ***************
*************** Workin version *************
Starting kernel ...
Uncompressing Linux............................................ done, booting the
kernel.
Linux version 2.4.7-rmk1 (root@tocai) (gcc version 2.95.2 19991024 (release)) #10 Fri
Feb 8 14:42:43
CET 2002
Processor: Intel StrongARM-1110 revision 8
Architecture: LART
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram
Relocating machine vectors to 0xffff0000
Warning: uninitialized Real Time Clock
Calibrating delay loop... 127.38 BogoMIPS
Memory: 16MB 16MB = 32MB total
Memory: 26612KB available (1166K code, 247K data, 56K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
SA1100 Real Time Clock driver v1.00
block: queued sectors max/low 17597kB/5865kB, 64 slots per queue
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
Linux Kernel Card Services 3.1.22
options: none
SA-1100 PCMCIA (CS release 3.1.22)
This hardware is not supported by the SA1100 Card Service driver
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4096K
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 56K
INIT: version 2.64 booting
cerf89x0:cerf89x0_probe()
PRODUCT_ID = 630e (OK)
PRODUCT_REV = 0900
reset_chip
reset_chip OK
cerf89x0.c: (kernel 2.3.99) Russell Nelson, Andrew Morton
eth0: cs8900 rev J Base 0xF6008300<6>, IRQ 10, MAC 00:00:5B:01:14:42
insmod: a module named crys already exists
LineCTL = 0013 (after TX,RX=0)
SET LineCTL = 0013
LineCTL = 00d3
hostname: (none)
Remounting root filesystem in read-write mode.
Mounting local filesystems.
Setting clock: Thu Jan 1 00:00:03 1970
INIT: Entering runlevel: 2
login:
Consider yourself LARTed!
LART Linux (net/HD version) -------------> ******** LART Ramdisk *************
Any suggestions,
Sandro
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
http://www.arm.linux.org.uk/armlinux/mailinglists.php
Please visit the above addresses for information on this list.
