hi So does that mean that i cant route all the pcmcia signals to one GPIO pin.
For the code , the IRQ number for the ready signal is being assigned to the irq feild of the socket_cap_t structure and no interrupt is being register for this signal. I could not figure out where he is using this ready signal IRQ number. So i need to have atleast 2 GPIO pins One for the ready signal and one which i can register for an interrupt.(which will be a multiplexed out put of card detect , bvd,...) iam right...........? On Tue, 30 Apr 2002 Russell King - ARM Linux wrote : >On Tue, Apr 30, 2002 at 01:30:02PM -0000, ashok mp wrote: > > Has any one implemented PCMCIA socket for SA1110 (with out >SA1111) > > and with only 1 gpio pin. > >This sounds highly improbable. You need at least 2 GPIO signals >for >PCMCIA, assigned to: > > - Card Detect > - RDY/INT _________________________________________________________ Click below to visit monsterindia.com and review jobs in India or Abroad http://monsterindia.rediff.com/jobs _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm http://www.arm.linux.org.uk/armlinux/mailinglists.php Please visit the above addresses for information on this list.
