Tom Lawton writes:
> icside: detected ARCIN V6 in slot 0
> hda: Seagate Technology 1275MB - ST31276A, 1221MB w/0kB Cache, CHS=2482/16/63
> hde: Conner Peripherals 850MB - CFS850A, 812MB w/64kB Cache, CHS=1651/16/63
> hdf: CD820E.0v1098300, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 9
> ide2 at 0x800d0c00-0x800d0c07,0x800d0ce0 on irq 32 Partition check:
> hda: [ADFS] hda1 [Linux] hda2 < hda3 hda4 >
> hde:<3>
> Unrecognised interrupt from backplane
Oops, this means that the expansion card layer does not know where the
interrupt came from.
> Interrupt lockup detected - disabling expansion card IRQs
> Expansion card IRQ state:
> 0: claimed, irqaddr = e0342290, irqmask = 1, status=FE
That's saying that the interrupt status register for card 0 is not
indicating that the card is not causing an interrupt. I suspect that
the registers are not pointing at the correct place.
Which connector are your drives connected to?
_____
|_____| ------------------------------------------------- ---+---+-
| | Russell King [EMAIL PROTECTED] --- ---
| | | | http://www.arm.linux.org.uk/~rmk/armlinux.html / / |
| +-+-+ --- -+-
/ | THE developer of ARM Linux |+| /|\
/ | | | --- |
+-+-+ ------------------------------------------------- /\\\ |
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
