At 11:09 PM 2/10/99 +0000, Russell King - ARM Linux Admin wrote:
>Mark van Doesburg writes:
>> christophe wrote: I've got an ebsa285 card but not the ARM SDT
>> (only got the demonstration version, which doesn't have angel
>> remote_a)
>>
>> Is there any Linux tool or free dos tool to upload Linux kernel
>> to ebsa285 flash memory ?
>>
>> I've created a very crude program to program the flash in the blank
>> programming mode. It has a module you have to load in order to access
>> the ROM. To program you have to run a simple program which allows you to
>> crash your computer if you get the address wrong :-) Let me know if
>> you're interested.
>
>I do have a working version of Digital's FMU (flash management utility)
>which works under Linux on the EBSA285. However, Digital have put a non-
>freely distributable license on it, so I'm unable to distribute it.
>
You can reference it on the web though.
>Since the license has been transferred to Intel, what are the chances
>of getting it changed? 0?
Good question, I'll ask. A better question (at least to me) is what
is ARM's view of low level firmware, utilities and open source?
Dave
> _____
> |_____| ------------------------------------------------- ---+---+-
> | | Russell King [EMAIL PROTECTED] --- ---
> | | | | http://www.arm.linux.org.uk/~rmk/armlinux.html / / |
> | +-+-+ --- -+-
> / | THE developer of ARM Linux |+| /|\
> / | | | --- |
> +-+-+ ------------------------------------------------- /\\\ |
>unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
>
>
----------------------------------------------------------------------
David A Rusling Consulting Engineer
ARM Limited
Liberty House,
Moorbridge Road,
Maidenhead, SL6 8LT
Tel: UK-(0)1628-427754
Fax: UK-(0)1628-780551
e-mail: [EMAIL PROTECTED]
----------------------------------------------------------------------
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
