Nico,
Just a bit more of information... The kernel hangs right after "init: memory
vi". Then it spews an endless string of "*** CONSOLE_ERROR" messages:
...
Starting kswapd v 1.4.2.2
Keyboard driver v1.01
**** Turning off console printing ****
LSB: Done with kbd_init
SA1100 Serial driver version 4.13 with no serial options enabled
tty00 at 0xf8050000 (irq = 17) is a SA1100 UART
Ramdisk driver initialized : 16 ramdisks of 16384K size
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
init: memory vi
*** CONSOLE_ERROR: console_print entry: vcd->screen.origin: c05227ec,
(c008d200)
*** CONSOLE_ERROR: console_print entry: vcd->screen.origin: c05227ec,
(c008d200)
*** CONSOLE_ERROR: console_print entry: vcd->screen.origin: c05227ec,
(c008d200)
*** CONSOLE_ERROR: console_print entry: vcd->screen.origin: c05227ec,
(c008d200)
....
Note that this I called "angelboot" with the following parameters:
angelboot/angelboot -d /dev/ttyS0 -c "9600 8N1" -b 0x8000 -e 0xc0008000 -S
115200 -O ramdisk.gz -B 0x800000 vmlinux-2.0.35
Any ideas?
Jason
----------
From: Chagas, Jason
Sent: Monday, March 08, 1999 8:14 PM
To: 'Nicolas Pitre'
Cc: '[EMAIL PROTECTED]'; Chagas, Jason
Subject: Brutus Linux v2.0.35 hangs
Nico,
I've been able to build (w/ 'a.out' Binutils 2.9.1.0.19a and
Egcs 1.1.1) both Kernel v2.0.35 and the Itsy Brutus version (v2.0.30)
downloaded from Digital. Both versions seem to start booting ok and but
they suddenly "hang" right after "**** Turning off console printing ****".
These are the messages that come up on the screen:
FrameBuffer : 0xc008d000, len:81919
Console: colour A-series 53x29x256, 1 virtual console (max
63)
Calibrating delay loop, , ok - 194,15 BogoMIPS
Brutus PCMCIA initialization
Memory: 11320k/16384k available (440k kernel code, 36k
reserved, 492k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Linux version 2.0.35 ([EMAIL PROTECTED])
(gcc version egcs-2.91.60 19990113/philb (egcs-1.1.1
release)) #3 Mon Mar 8 16:26:27 EST 1999
Starting kswapd v 1.4.2.2
Keyboard driver v1.01
**** Turning off console printing ****
These are the commands I use to load v2.0.35 (Angel 1.02)
and Itsy (Angel 1.0) kernels respectively:
angelboot/angelboot -d /dev/ttyS0 -c "9600 8N1" -b 0x8000 -e
0xc0008020 -S 115200 -O ramdisk.gz -B 0x800000 vmlinux-2.0.35
../angelboot/angelboot -d /dev/ttyS0 -c "9600 8N1" -b 0x8000
-e 0x8020 -S 115200 -O ramdisk-itsy.gz -B 0x800000 vmlinux-itsy1
Any ideas?
Jason
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
