On Thu, 7 Oct 1999, Dave Borja wrote:
> This setup you describe-- right now you are just trying
> to talk to it via ADK ARM debug? We got that far,
> using ARM 2.11a sdk on a windows 98 box..
> We had a similar problem with
> no response from angel and switched all the baudrate
> settings to 9600. Now we can run the test apps.
Yeah I can't even get it to talk to the ARM debug.
>
> Or we could. The brutus board seems to taken a
> hike south. The numeric LED is showing a 7 now
> everytime we power up and we can't make a connection
> to it either with the debugger SDK or angleboot on linux.
>
> Anyone seen the 7? It's not documented anyplace that I can
> find.
I've always gotten that 7 (this is the first time I've tried to use
Brutus) and I don't know what it means either...
Vasant.
> Dave
> -----Original Message-----
> From: Vasant Ramasubramanian <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Thursday, October 07, 1999 12:27 AM
> Subject: Brutus Woes, any help?
>
>
> >Hello all!
> >
> >I'm trying to setup my Brutus board to run the basic test programs that
> >come with the Kit (requires the SDT 2.50 to run, which I have) and I am
> >not even sure that my Brutus is working. From all the documentation I've
> >read (what little is provided) connecting the null-modem cable to J23 on
> >the Brutus and to a COM port on the PC should at least bring up a message
> >about Angel running on Brutus, right?
> >
> >I used 9600,8,N,1 and 115200,8.N,1 for the serial port settings yet when I
> >turned Brutus on, I didn't get anything. I'm certain the PC is fine, the
> >serial port is fine, the null modem cable is fine, I've checked those
> >things out. I also made sure all the dip swtiches were in the default
> >position specified in the .pdf documentation for Brutus. Any ideas?
> >
> >I haven't gotten to using angelboot.tgz or putting my RAM DISK on there or
> >anything like that.
> >
> >For the ARM SDT 2.5 portion, I was using Win95 OSR2.
> >
> >I'm running Red Hat 6.0 for the Linux end of things, hopefully if my
> >Brutus is working I can get it to boot Linux...
> >
> >I'd appreciate any help/suggestions.
> >
> >Thanks, Vasant.
> >
> >unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
> >
>
> unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
>
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
