Philip Blundell <[EMAIL PROTECTED]> writes:
> That should be OK, though newer versions do exist and that binutils in
> particular has some nasty bugs.
I tried doing a crosscompile with an egcs-2.91.60 toolchain I have,
and that produced a 2.2.12 that works much better; the only patches I
needed were to add an entry for the PDC20262 to ide-pci.c and pci.h,
and to change serial_21285.c to handle the wacky serial setup on my
boards. I get the same slow disk performance though, which I pretty
much expected.
2.3.19-rmk1 built with the cross-compiler still utterly fails to boot -- I
don't even get as far as 'Uncompressing Linux...'. Any suggestions on
what might be going on?
--nat
--
nat lanza --------------------- research programmer, parallel data lab, cmu scs
[EMAIL PROTECTED] -------------------------------- http://www.cs.cmu.edu/~magus/
there are no whole truths; all truths are half-truths -- alfred north whitehead
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
