I have a Brutus board currently running
Linux localhost 2.3.35-rmk1-np7 #6 Thu Mar 16 10:58:40 EST 2000 armv
Ok. I wrote "hello world" and it works fine, so my toolchain works.
(hooray!) Now I have a bunch of things I need eventually to do, and don't
really know where to start:
- port a driver for our PC card (exists for non-embedded windoze)
- drive a spare GPIO line to control a switch (#20 for the light, maybe)
- put graphics on the screen
- access a Flash card, ideally as an ext2 filesystem
- do TCP/IP over Ethernet
These are in more or less decreasing order of importance. I haven't been
able to find much information about this. We will also need to have a
driver for a smaller LCD screen; I'm guessing that modifying the existing
LCD driver to do this would not be too difficult.
Thanks for any help. If there is someplace I should look for information,
I'd appreciate knowing. I've started reading about Linux device drivers,
but am quite new to this.
________________________
/
/ Wise words of the day:
To the optimist, the glass is half full,
To the pessimist, the glass is half empty.
To the engineer, the glass is twice as big as it needs to be.
--Linda Vaughan
\ [EMAIL PROTECTED]
\________________________
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
++ Please use [EMAIL PROTECTED] for ++
++ kernel-related discussions. ++
